Handheld Grounding Rod _ KELIDA 1000kV High Voltage Grounding Wire _ Handheld High Voltage Grounding Rod Combination

Description :

　　Kolida 1000Characteristics of KV high-voltage grounding wire:The grounding wire is a temporary grounding device, which is more convenient to use, has a more flexible grounding point, and has higher safety and reliability compared to fixed grounding wires During power outage maintenance and inspection of electrical equipment and power lines, it can prevent sudden power outages and attacks from residual charges induced by electricity, ensuring the safety of personnel working on the equipment.

　　Kolida 1000kV High Voltage Grounding WireInstructions for use:

　　(1) When hanging the grounding wire: first connect the grounding clamp, and then connect the electrical clamp; When removing the grounding wire, it is necessary to first remove the grounding clamp according to the procedure, and then remove the grounding clamp.

　　(2) Installation: Fix the double eye copper nose of the grounding soft copper wire phase on the corresponding position of the grounding clamp on the grounding rod (there are fixed and movable grounding clamps), and fix the single eye copper nose of the grounding wire phase on the grounding clamp or ground pin to form a complete grounding wire.

　　(3) Verify whether the voltage level of the grounding rod is consistent with the voltage level of the operating equipment.

　　(4) The grounding flexible copper wire has phase separation and combination types, and the grounding rod has flat mouth and double spring hook clamps.

　　Daily maintenance of the 1000 kV high-voltage grounding wire of Kelida:Before each use, carefully check whether the grounding wire is intact, whether the soft plastic copper wire is exposed or broken, and whether the nut is loose. Otherwise, it cannot be used. The product should be kept clean and tidy, and should not be thrown randomly on the ground. Attention should be paid to cleanliness and hygiene work to prevent sediment and dirt from entering the pores of the product, which may affect the normal use of the grounding wire. The grounding wire that has been subjected to short-circuit current should be judged based on the magnitude of the short-circuit current and appearance inspection, and generally should be scrapped.

　　Notes:Electric shock, unreliable grounding, failure to conduct electrical grounding tests, or the use of unqualified voltage testers can all cause dangerous accidents.

AfterSalesService :

• 1000kV high-voltage grounding wire