Handheld grounding rod assembly_10kv high-voltage grounding wire assembly_Handheld grounding rod grounding wire combination

Description :

　　Kolida brand 10kV grounding wire set:The length of the grounding wire in the 10KV grounding wire set is 10 meters, the length of the grounding rod is 0.7 meters, the wire diameter is 25 square meters, the current limiting resistance is 0.56 Ω, the current dissipation time is 15 seconds, the material of the two end joints is all copper, the external dimensions are 0.8 meters, and the weight is 5 kilograms.

　　Kelida brandInstructions for using 10kV high-voltage grounding wire:

　　(1) When hanging the grounding wire: first connect the grounding clamp, and then connect the electrical clamp; When removing the grounding wire, it is necessary to first remove the grounding clamp according to the procedure, and then remove the grounding clamp.

　　(2) Installation: Fix the double eye copper nose of the grounding soft copper wire phase on the corresponding position of the grounding clamp on the grounding rod (there are fixed and movable grounding clamps), and fix the single eye copper nose of the grounding wire phase on the grounding clamp or ground pin to form a complete grounding wire.

　　(3) Verify whether the voltage level of the grounding rod is consistent with the voltage level of the operating equipment.

　　(4) The grounding flexible copper wire has phase separation and combination types, and the grounding rod has flat mouth and double spring hook clamps.

　　Notes:Electric shock, unreliable grounding, failure to conduct electrical grounding tests, or the use of unqualified voltage testers can all cause dangerous accidents.

AfterSalesService :

• 10kV high-voltage grounding wire