Haichen supplies plastic waterstop with back mounted plastic waterstop according to the national standard of 280-4mm, and PVC buried waterstop with reasonable price

Description :

Introduction to 651 Plastic Rubber Waterstop

　　651 rubber waterstop is a widely used type of buried rubber waterstop, with a dovetail design on both sides and a circular hole in the middle. There are three waterproof protrusions on each side of the circular hole.

　　The specifications are 200mm, 250mm, 280mm, 300mm, 350mm, 400mm, 450mm, and 500mm in width, with a thickness between 6mm and 25mm. The outer diameter of the center hole is generally 20mm, 25mm, 30mm, 40mm, and 50mm. Of course, customization can also be made according to customer needs.

　　651 rubber waterstop is a commonly used type of waterstop, belonging to the buried type waterstop (i.e. CB type rubber waterstop: with a hole hole in the middle of the buried type), with three protruding ribs on each side of the center hole. 651 type rubber waterstop is widely used in waterstop products, and commonly used buried waterstop products include 652 type, 653 type, etc. 651 type rubber waterstop is mainly used in construction joints and deformation joints during concrete pouring, and is integrated with concrete structures such as foundation engineering, underground facilities, tunnel culverts, water conveyance aqueducts, water retaining dams, etc., to ensure the service life of engineering construction.

AfterSalesService :

• Plastic waterstop