Wear resistant submersible dredging pump -3kw mud pump price - source manufacturer in stock

Description :

　　Wear resistant submersible dredging pump -3kw mud pump price - The unique sealing device of the source manufacturer can effectively balance the pressure inside and outside the oil chamber, thereby limiting the reliability of mechanical seals. The motor has overheat protection and water inlet function. Under harsh working conditions, various protective measures such as detection and protection can operate safely for a long time. The pre mixed impeller of the pump can impact the deposited sludge into high concentration turbulence, so the pump can achieve high concentration sedimentation without equipment. It is used for transporting river sand, sand, coal slag, tailings, iron sand, mineral sand, and other liquids containing abrasive solid particles.

　　Wear resistant submersible dredging pump -3kw mud pump price - source manufacturer usage conditions:

　　1. The power supply is 50Hz or 60Hz/230V/380V/415V/440V/660V/1440V, three-phase AC power supply, and the capacity of the distribution transformer is 2-3 times the rated capacity of the motor.

　　2. The temperature of the medium should not exceed 60 ° C, and the R-type medium should not exceed 140 ° C, and the medium should not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. Diving depth for passengers: not exceeding 50 meters, the small diving depth depends on the diving motor.

　　5. The working position of the pump in the medium is vertical, and the installation method can be selected as lifting type.

　　Structural features:

　　1. The whole machine is a dry bottom pump type. The motor adopts an oil chamber sealing method and an internal mechanical seal, which can effectively prevent high-pressure water and impurities from entering the motor chamber.

　　In addition to the main impeller, there is also a stirring impeller that can stir the sludge deposited at the bottom of the water into turbulence and extract it.

　　3. Overflow components such as impellers and mixing impellers are made of high hardness, high chromium cast steel. They are wear-resistant, corrosion-resistant, have strong sand removal ability, and can pass through large solid particles.

　　4. The motor is submerged in water without being limited by the suction stroke, with high slag absorption rate and more thorough sediment extraction.

　　5. The stirring impeller directly contacts the sedimentary surface and controls the concentration through the diving depth. In cases where the specific gravity of the medium is high, devices can be added to increase the concentration of the medium.

　　Wear resistant submersible dredging pump -3kw mud pump price - Source manufacturer model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear Resistance Submersible Mud Pump

　　100- Rated flow rate (m3/h)

　　28- Rated head (m)

　　15- Rated motor power [kw]

　　CSQX: Stainless steel submersible mud pump CSQL: Self cooling submersible cement sand pump

　　CSQR: High temperature resistant submersible cement sand pump CSQRX: High temperature resistant stainless steel submersible cement sand pump

　　Wear resistant submersible dredging pump -3kw mud pump price - Source manufacturer Scope of use:

　　1. Drainage, rivers, lakes, reservoirs, and ports.

　　2. Extract sand from rivers, lakes, and other bodies of water.

　　3. Land reclamation in coastal areas.

　　4. Sand and mud in drainage engineering construction.

　　5. Cleaning of sediment in municipal pipelines and rainwater pump stations.

　　6. Clean the sludge, mud, sand, and gravel in sedimentation tanks (such as sewage treatment plants, steel plants, and thermal power plants).

　　7. High temperature waste residue, boiler high-temperature slurry, heat-resistant oxide skin, and metallurgical high-temperature slurry pump discharge.

　　8. Extract mineral powder and mortar from diamond sand, tailings, quartz sand, rare earth ores, etc.

　　One year warranty, if not satisfied, return directly. High chromium alloy wear-resistant sand pump model online consultation, we have the strength to have good prices! Wear resistant sand pump prices, compare and choose! Not just giving you a choice of price! Each high wear-resistant pump produced ensures that the steel saw does not move, and the pump can operate continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer.

　　Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

AfterSalesService :

• Wear resistant submersible dredging pump