Non clogging twisted suction dredging pump for sewage sludge cleaning

Description :

　　The non clogging twisted suction dredging pump is used for cleaning sewage sludge. The overcurrent components are made of high wear-resistant and wear-resistant alloy casting. Like other characteristics, it is suitable for conveying hard mortar, mortar, slag containing solid particles, etc. The solid-liquid mixture concentration can reach 60%. It is an ideal equipment for sand mining and transportation. Users can use a series operation method of one or multiple machines to achieve long-distance construction and transport liquids containing abrasive solid particles, such as river sand, gravel, coal slag, tailings, iron sand, and ore sand.

　　Model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible mud pump

　　100 rated flow rate (m3/h)

　　28- Rated head (m)

　　15- Rated power of supporting motor (Kw)

　　CSQX: Stainless Steel Submersible Mud Pump CSQL: Self Cooling Submersible Mud Pump

　　CSQR: High temperature resistant submersible mud pump CSQRX: High temperature resistant stainless steel submersible mud pump

　　Non clogging twisted suction dredging pump is used for cleaning sewage sludge. Scope of use:

　　1. Rivers, lakes, reservoirs, urban rivers, and other dredging projects.

　　2. Cleaning of sludge, silt, and gravel from sewage treatment plants, steel plants, thermal power plants, and other sedimentation tanks.

　　3. Discharge of high-temperature waste residue, boiler high-temperature slurry, heat-resistant scale, metallurgical slurry pump and other high-temperature slag. 4. Extract ore powder, mortar, etc. from diamond sand, tailings, quartz sand, rare earth ores.

　　5. Coastal reclamation, sand unloading and reclamation, water storage and sediment regulation for power stations, etc.

　　6. Extraction and transportation of coal slurry, coal slag, power plant fly ash slurry, and coal slurry.

　　7. Transport and clear various slurry materials, such as ceramics and marble powder.

　　8. Equipped with an independent mixing impeller. Mainly used for environmental protection, municipal engineering, thermal power plants, gas coking plants, refineries, steel plants, mining, papermaking, cement plants, food plants, printing and dyeing industries, to pump thick liquids, heavy oil, residue oil, dirty liquids, mud, mortar, quicksand and sludge in urban sewage channels, as well as liquids containing sediment residues and corrosive liquids.

　　Usage conditions:

　　1. The power supply is a 50Hz 380V three-phase AC power supply (customized 60HZ is required).

　　2. The temperature of the medium shall not exceed 60 ℃, and the temperature of the high-temperature resistant type shall not exceed 140 ℃. This medium does not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. The diving depth of the unit shall not exceed 60 meters, and small diving depths must be submerged in the motor.

　　5. Make the device work vertically in the medium, and the operation mode is continuous operation.

　　Non clogging twisted suction dredging pump for sewage sludge cleaning structural characteristics:

　　1. In addition to the main impeller, there is also an independent mixing impeller that can mix the sediment, sand, silt, and ore slurry that settles at the bottom of the water into a slurry and extract it.

　　2. The flow components such as impellers and stirring impellers are made of high hardness and high chromium cast steel, which has strong wear resistance, corrosion resistance, and high discharge capacity.

　　3. The motor can enter the water without restriction, resulting in a high slag discharge rate and more thorough dredging.

　　Precautions for unclogging the twisted suction dredging pump for sewage sludge cleaning

　　When using a pump, the current should not exceed the rated current as the actual head is lower than the nominal head. Concentration.

　　2. During use, please pay attention to preventing the solid medium around the sand pump from collapsing on a large scale and burying it.

　　If the extracted solid medium does not collapse or form thin layers, the sand pump must be continuously moved to achieve the purpose of continuous extraction of solid medium, but it will reduce the solid content.

　　If the medium contains small stones, it will affect the efficiency of the sand pump and reduce the solid content.

　　5. Large stones can even block the grid of the sand pump, affecting the pump's water output and solid content.

　　Main performance:

　　1. The overall equipment is simple, no auxiliary mixing device or spray device is needed, the operation is simple, and the total investment is reduced.

　　2. The flow components such as impellers and stirring impellers are made of high hardness and high chromium cast steel, which has wear resistance, corrosion resistance, and strong sand removal ability.

　　3. The flow channel is wide, with good anti blocking performance, and can pass through large solid slag particles.

　　4. The pump adopts a hard alloy mechanical seal, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor.

　　5. The motor submerges into the water without being limited by the suction range, resulting in a high slag suction rate and more thorough dewatering.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer. ）Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

　　This quotation is for reference only. The price varies depending on the power size. Please call us for more information!

AfterSalesService :

• Do not block the twisting suction dredging pump