Submersible slurry pump - River sand pump - Stirring sand pump - High flow unobstructed wear-resistant sediment pump

Description :

　　The submersible slurry pump, river sand pump, mixing sand pump, and high flow non clogging wear-resistant sediment pump are pump products produced by our company, mainly used for transporting ore tailings, tailings, and tailings. It has the characteristics of high efficiency, wear resistance, no blockage, and the passage of large particles. Sedimented mortar, ore, mineral, slag, etc. can be stirred vigorously with a mixing head to form a slurry and pumped simultaneously. Provide a convenient method for cleaning sediment.

　　Model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible mud pump

　　100 rated flow rate (m3/h)

　　28- Rated head (m)

　　15- Rated power of motor (Kw)

　　CSQX: Stainless Steel Submersible Mud Pump CSQL: Self Cooling Submersible Mud Pump

　　CSQR: High temperature resistant submersible mud pump CSQRX: High temperature resistant stainless steel submersible mud pump

　　Submersible slurry pump - River sand pump - Stirring sand pump - High flow unobstructed wear-resistant sediment pump Application range:

　　1. Dredging projects for rivers, lakes, reservoirs, urban rivers, etc

　　2. Cleaning of sludge, sediment, and sand from sedimentation tanks in sewage treatment plants, steel plants, thermal power plants, and other facilities.

　　3. Discharge of high-temperature waste residue, boiler high-temperature slurry, heat-resistant scale, metallurgical slurry pump and other high-temperature slag. 4. Extract ore powder, mortar, etc. from diamond sand, tailings, quartz sand, rare earth ores.

　　5. Coastal reclamation, sand unloading and reclamation, water storage and sediment regulation for power stations, etc.

　　6. Extraction and transportation of coal slurry, coal slag, power plant fly ash slurry, and coal slurry.

　　7. Transport and clear various slurry materials, such as ceramics and marble powder.

　　8. Equipped with an independent mixing impeller. Mainly used for environmental protection, municipal engineering, thermal power plants, gas coking plants, refineries, steel plants, mining, papermaking, cement plants, food plants, printing and dyeing industries, to pump thick liquids, heavy oil, residue oil, dirty liquids, mud, mortar, quicksand and sludge in urban sewage channels, as well as liquids containing sediment residues and corrosive liquids.

　　Usage conditions:

　　1. The power supply is a 50Hz 380V three-phase AC power supply (customized 60HZ is required).

　　2. The temperature of the medium shall not exceed 60 ℃, and the temperature of the high-temperature resistant type shall not exceed 140 ℃. This medium does not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. The diving depth of the unit shall not exceed 60 meters, and small diving depths must be submerged in the motor.

　　5. Make the device work vertically in the medium, and the operation mode is continuous operation.

　　Structural features:

　　1. In addition to the main impeller, there is also an independent mixing impeller that can mix the sediment, sand, silt, and ore slurry that settles at the bottom of the water into a slurry and extract it.

　　2. The flow components such as impellers and stirring impellers are made of high hardness and high chromium cast steel, which has strong wear resistance, corrosion resistance, and high discharge capacity.

　　3. The motor can enter the water without restriction, resulting in a high slag discharge rate and more thorough dredging.

　　Functions and advantages of using submersible slurry pump, river sand pump, mixing sand pump, high flow non clogging wear-resistant sediment pump:

　　1. Easy to move. Put it in water when in use, and lift it up with an electric hoist when not in use.

　　2. Mute. The submersible sand pump is driven by an electric motor and has almost no noise. In addition, the pump is completely submerged below the water surface, thereby isolating noise.

　　3. Wear resistance. The submersible sand pump is made of wear-resistant alloy, not cast iron pump!

　　When pumping sand, customers will encounter many different sizes of sand and gravel particles. Usually, pumps cannot operate under these conditions and are prone to clogging the impeller, resulting in low sand extraction efficiency, which can affect economic benefits.

　　In this case, our company can choose submersible sand suction pumps, sand discharge pumps, and ore sand pumps. The impeller structure is semi open and can accommodate particles up to 5 centimeters in size. Usually, 2-3 centimeters of sand is not a problem.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　This quotation is for reference only. The price varies depending on the power size. Please call us for more information!

AfterSalesService :

• Submersible Slurry Pump