Pumped river sand pump, submersible sand pump with agitator, mud sand pump

Description :

　　The submersible sand pump with agitator is made of wear-resistant alloy, which has good wear resistance and corrosion resistance. It has a large flow channel and strong sewage discharge capacity. It can pass through large solid particles and is widely used for sand pumping, gold pumping, iron sand pumping, reservoir dewatering, river channel dewatering, sedimentation tank dewatering, fish pond sludge, sinking well, mineral mud dredging, pumping coal slurry, fly ash treatment, etc.

　　The structural characteristics of the submersible sand pump with agitator and mud sand pump for pumping water into the river are as follows:

　　1. The overall equipment is simple, no auxiliary mixing device or spray device is needed, and the operation is simple, reducing the total unit investment.

　　2. The overflow components such as impellers and mixing impellers are made of high hardness, high chromium cast steel, which has the characteristics of wear resistance, corrosion resistance, strong slag discharge ability, and can absorb larger solid particles.

　　3. Wide flow channel, good anti clogging performance, and superior cavitation performance.

　　4. The overcurrent components are made of special materials with good wear resistance and corrosion resistance, and have undergone special treatment.

　　5. The pump adopts a hard alloy mechanical seal for sealing.

　　Application scope:

　　1. Sludge at the bottom of the hydroelectric dam

　　The bottom pool of a hydroelectric dam is often filled with sediment, making it difficult to handle. Use a submersible sand pump to directly place it into the pool while draining the soil and sand. The pool will no longer be filled and there is no need to manually remove sand.

　　2. Clean up the sediment in the coal tank of the power plant, the discharge of coal slag from the sedimentation tank, and the slag or ash residue after coal combustion.

　　3. Clean and purify sediment in the steel plant, and transport water slag in the blast furnace of the steel plant. Cleaning of turbid circulating water system in steel hot rolling mill and sedimentation of sediment in cyclone separator sedimentation tank.

　　4. Settlement and cleaning solution for underground water tank storage - solving the problem of discharge of mine sludge

　　Whether it is a metal mine or a coal mine, the main underground water tank will clear sediment before the rainy season every year. Usually, manual methods are used to clean sediment. The existing problems are that manual cleaning has high labor intensity, high labor costs, long cleaning cycles, and affects production. Use a submersible sand pump to clean sediment and pump mud and sand to achieve mechanization of sediment cleaning.

　　5. Remove solid sediment from the oxidation ditch of the sewage plant and the wastewater of the paper mill.

　　6. Pumping for removing silt from inland waterways and underwater ports.

　　7. Pumping mud at construction sites for bridges and roads

　　Drainage during project construction, drainage and silt discharge during bridge pier construction, urban rainwater pumping station, sewage treatment plant.

　　The meaning of the model of the submersible sand pump with agitator and mud sand pump for pumping water into the river is:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible cement sand pump

　　100- Rated flow rate (m3/h)

　　28- Rated head (m)

　　15- Rated power of electric motor (Kw)

　　CSQX: Stainless Steel Submersible Mud Pump CSQL: Self Cooling Submersible Mud Pump

　　CSQR: High temperature resistant submersible cement sand pump CSQRX: High temperature resistant stainless steel submersible cement sand pump

　　Pumping river sand pump, submersible sand pump with agitator, mud sand pump, usage conditions:

　　1. The power supply is a 50Hz, 60Hz/230V, 380V, 415V, 660V, 1440V three-phase AC power supply. The capacity of the distribution transformer is 2-3 times the rated capacity of the motor.

　　2. The temperature of the medium shall not exceed 60 ° C, the temperature of the heat-resistant type shall not exceed 140 ° C, and the medium shall not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. Diving depth for passengers: not exceeding 60 meters, not less than 1 meter.

　　5. The working position of the pump in the medium is vertical, and the working state is continuous.

　　Our factory mainly produces submersible sand pumps, river dredging pumps, mixed mud pumps, dredging pumps, hydraulic mud pumps, stainless steel mud pumps, high-temperature sewage pumps, etc. Yes, delivery within 3 days, one-year warranty/wooden crate packaging.

　　Manufacturer of wear-resistant sand pumps, return directly if not satisfied. High chromium alloy wear-resistant sand pump model online consultation, we have the strength to have good prices! Wear resistant sand pump prices, compare and choose! Not just giving you a choice of price! Each high wear-resistant pump produced ensures that the steel saw does not move, and the pump can operate continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer.

　　Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

AfterSalesService :

• Pumping river sand pump