Sand suction pump, submersible sand suction pump, submersible sand discharge pump, Ruiyu sand pump manufacturer

Description :

　　The sand suction pump, submersible sand suction pump, and submersible sand discharge pump from Ruiyu are designed specifically for building environments with many pebbles and large particles. On the basis of absorbing the advantages of submersible sand pumps, the pump type has been optimized for pump design, greatly improving the overflow capacity of the pump, and the particle diameter can reach 6cm.

　　Sand suction pump, submersible sand suction pump, submersible sand discharge pump, Ruiyu sand suction pump manufacturer, usage conditions:

　　1. The power supply is 50Hz, 380V three-phase AC power supply (customized 60HZ is required).

　　2. The temperature of the medium should not exceed 60 ℃, and high-temperature resistant media should not exceed 140 ℃, and the medium should not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. The diving depth of the unit shall not exceed 60 meters, and the diving depth must be submerged in the motor.

　　5. Make the device work vertically in the medium, and the operation mode is continuous operation.

　　Model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible mud pump

　　100- Rated flow rate (m3/h)

　　28- Rated head [m]

　　15- Rated power of electric motor (Kw)

　　CSQX: Stainless steel submersible mud pump CSQL: Self cooling submersible cement sand pump

　　CSQR: High temperature resistant submersible cement sand pump CSQRX: High temperature resistant stainless steel submersible cement sand pump

　　Sand suction pump, submersible sand suction pump, submersible sand discharge pump, Ruiyu sand suction pump manufacturer, structural characteristics:

　　1. The whole machine is a dry pump, and the motor adopts an oil chamber sealing method. There is a mechanical seal inside to effectively prevent high-pressure water and impurities from entering the motor chamber.

　　In addition to the main impeller, there is also a stirring impeller that can stir the sludge deposited at the bottom of the water into turbulence and extract it.

　　3. The overflow components such as impellers and mixing impellers are made of high hardness, high chromium cast steel, which has the characteristics of wear resistance, corrosion resistance, strong drainage ability, and can pass through large solid particles. .

　　4. The motor is submerged in water without being limited by the suction stroke, with high slag absorption rate and more thorough sediment extraction.

　　5. Simplified the overall equipment and reduced the total investment per unit.

　　Sand suction pump, submersible sand suction pump, submersible sand discharge pump, Ruiyu sand suction pump manufacturer, scope of use:

　　1. Extracting sand from rivers, discharging sand particles on the seabed, filling sand in coastal reclamation, and removing mud from fish ponds.

　　2. Tailings transportation

　　3. Transport of sediment in the sedimentation tank, sand extraction in the sedimentation tank, and removal of mineral sand from the clear water bank.

　　4. Transportation of high-temperature slag slurry in phosphorus chemical industry, high-temperature powder slurry in boilers, and cleaning of heat-resistant oxide skin with water.

　　5. Transportation and extraction of media such as gold ore, iron ore, quartz sand, tailings sand, etc.

　　6. Municipal pipelines, water conservancy projects, river dredging, sand pumping, and land reclamation.

　　7. Transport corrosive liquids containing solid particles.

　　One year warranty, if not satisfied, return directly. High chromium alloy wear-resistant sand pump model online consultation, we have the strength to have good prices! Wear resistant sand pump prices, compare and choose! Not just giving you a choice of price! Each high wear-resistant pump produced ensures that the steel saw does not move, and the pump can operate continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　The two simple methods are to use a steel saw blade to see the answer. ）Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

AfterSalesService :

• Sand suction pump