Guangdong 80 square wear-resistant sand suction pump quotation CSQ80-46-30 submersible sand suction pump

Description :

　　Guangdong 80 square wear-resistant sand suction pump quotation CSQ80-46-30 submersible sand suction pump is equipped with a mixing impeller at the bottom, and an electric mixer can also be installed independently. By strong stirring, the bottom sediment can be stirred into a slurry and pumped simultaneously. It can be widely used in mining, power, metallurgy, coal, environmental protection and other industries to transport slurry containing abrasive solid particles. Such as gold mining, slurry transportation in metallurgical beneficiation plants, hydraulic ash removal in thermal power plants, coal slurry and heavy medium transportation in coal washing plants, river dredging, and river pumping dredging.

　　Guangdong 80 square wear-resistant sand suction pump quotation CSQ80-46-30 submersible sand suction pump usage conditions:

　　1. The power supply is 50Hz, 380V three-phase AC power supply (customized 60HZ is required).

　　2. The temperature of the medium should not exceed 60 ℃, and high-temperature resistant media should not exceed 140 ℃, and the medium should not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. The diving depth of the unit shall not exceed 60 meters, and the small diving depth must be submerged in the motor.

　　5. Make the device work vertically in the medium, and the operation mode is continuous operation.

　　Guangdong 80 square wear-resistant sand suction pump quotation CSQ80-46-30 submersible sand suction pump model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible mud and sediment pump

　　100- Rated flow rate (m3/h)

　　28- Rated head [m]

　　15- Rated power of electric motor (Kw)

　　CSQX: Stainless steel submersible mud pump CSQL: Self cooling submersible cement sand pump

　　CSQR: High temperature resistant submersible cement sand pump CSQRX: High temperature resistant stainless steel submersible cement sand pump

　　Scope of use:

　　1. Sedimentation engineering for rivers, lakes, and reservoirs

　　2. Clean the sludge, mud, sand, and gravel in sedimentation tanks (such as sewage treatment plants, steel plants, and thermal power plants).

　　3. High temperature waste residue, boiler high-temperature slurry, heat-resistant oxide skin, and metallurgical high-temperature slurry pump discharge.

　　4. Extract ore powder and mortar from diamond sand, tailings, quartz sand, rare earths, etc.

　　5. Coastal land reclamation, sand unloading and reclamation, power station water storage and sand adjustment, etc.

　　6. Extraction and transportation of coal slurry, coal slag, power plant fly ash slurry, and coal slurry.

　　7. Transportation and desilting of various slurry materials (such as ceramics and marble powder).

　　8. Equipped with independent mixing impellers. Mainly used for environmental protection, municipal engineering, thermal power plants, coal gas coking plants, refineries, steel plants, mines, paper industry, cement plants, food plants, printing and dyeing industry, to extract concentrated liquids, heavy oil, residual oil, sewage from urban sewage channels, sludge, mortar, flowing sand and flowing sludge, as well as fluids and corrosive liquids containing mud, sand and slag.

　　Guangdong 80 square wear-resistant sand suction pump quotation CSQ80-46-30 submersible sand suction pump structural characteristics:

　　1. In addition to the main impeller, there is also an independent mixing impeller that can mix the mud, silt, ore, etc. deposited at the bottom of the water into a slurry and extract it.

　　2. The overflow components such as impellers and mixing impellers are made of high hardness, high chromium cast steel, which has the characteristics of wear resistance, corrosion resistance, strong drainage ability, and can pass through large solid particles. .

　　3. The motor dives into the water without being limited by the suction stroke, with high slag absorption rate and more thorough sediment extraction.

　　Guangdong 80 square wear-resistant sand suction pump quotation CSQ80-46-30 submersible sand suction pump usage characteristics and advantages:

　　1. Convenient to move. When in use, place it underwater, and when not in use, use an electric hoist to lift it up.

　　2、 Mute. The submersible sand pump itself is driven by an electric motor and has almost no noise. In addition, the pump is completely submerged below the water surface, which isolates the noise.

　　3、 Wear resistant. The material of the submersible sand pump is wear-resistant alloy, not cast iron pump!!

　　Customers will have a lot of sand and gravel particles of different sizes when pumping sand. Generally, pumps cannot use this condition, which can easily block the impeller, resulting in low sand pumping efficiency and affecting economic benefits.

　　In this situation, our company's submersible sand suction pump, sand discharge pump, and mineral sand pump can be selected. The impeller structure is semi open and can pass particles of 5 centimeters. Generally, 2-3 centimeters of sand and gravel are not a problem.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

AfterSalesService :

• Quotation for Guangdong 80 cubic meter wear-resistant sand suction pump