Submersible sand pump, wear-resistant sand pump, mining wear-resistant mineral sand pump

Description :

　　Submersible sand pump, wear-resistant sand pump, and mining wear-resistant mineral sand pump are single-stage single suction centrifugal pumps, which are divided into multiple main specification series according to the outlet diameter, such as 300mm, 250mm, 200mm, 150mm, 100mm, etc. This product has good wear resistance, a wide range of models, and is easy to choose from. Can meet the requirements of high flow and high head environments. This pump is innovative in both motor design and structural design. The number of impeller blades can be adjusted according to different working conditions. Suitable for transporting sediment containing large and small solid particles, strong mortar, mortar, tailings slurry, slag, etc. The solid-liquid mixture concentration of powder can reach 60%, making it an ideal sand pumping and delivery equipment. Users can use one or multiple machines in series according to actual working conditions to achieve long-distance construction.

　　Instructions for using submersible sand pump, wear-resistant sand pump, and mining wear-resistant mineral sand pump:

　　Please operate according to the conditions specified in the product manual. Due to the risk of leakage in submersible electric pump products, special attention should be paid to the basic requirements for safe use:

　　1. Do not pull the electric pump with force to remove the cable.

　　2. The power cord must have a leakage protection device.

　　3. During installation or maintenance, the power must be cut off

　　4. Without water for a long time, operation is not possible.

　　In addition, submersible sand pumps should be used reasonably according to the technical parameters of the product (flow rate and head) to extend the service life of the product.

　　If you work for a long time under non rated water head and flow for a long time, it is easy to burn the submersible motor.

　　Widely used:

　　1. Drainage, rivers, lakes, reservoirs, ports.

　　2. Extract sand from rivers, lakes, and other bodies of water.

　　3. Reclamation and cultivation in coastal areas.

　　4. Drainage of sandy soil in construction projects.

　　5. Cleaning of sediment from municipal pipelines and rainwater pump stations.

　　6. Cleaning of sedimentation tanks in steel plants, mineral processing plants, power plants, and sewage treatment plants.

　　7. Transportation of blast furnace slag and slag in steel plants.

　　8. Transportation of tailings, slag, and slurry from the beneficiation plant.

　　9. Remove coal slag, coal slurry, and coal slurry transportation.

　　11. Absorb solid particles of various diamond sands, quartz sands, and steel slag.

　　12. Mineral processing, gold mining, and iron sand absorption.

　　13. Transport slurry containing various impurities.

　　14. Transport other media containing larger solid particles.

　　Submersible sand pump, wear-resistant sand pump, and mining wear-resistant mineral sand pump. Usage conditions:

　　1. The power supply is 50Hz or 60Hz/230V/380V/415V/660V/1440V, three-phase AC power supply, and the capacity of the distribution transformer is three times the rated capacity of the motor.

　　2. The temperature of the medium shall not exceed 50 ° C, and the R type shall be 120 ° C (not exceeding 140 ° C), and it shall not contain flammable and explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. Diving depth of the pump: not exceeding 40 meters, the low diving depth depends on the diving motor.

　　5. The working position of the pump in the medium is vertical, and the installation method can be selected as lifting type.

　　Maintenance method:

　　Users should maintain according to the requirements of the product manual. Maintenance issues should be resolved by personnel with technical and relevant knowledge. Especially after a period of use, please pay attention to whether the electrical insulation meets the requirements. If maintenance or use is improper, insulation resistance is low, cables are damaged or machines rust, operation is difficult, and starting current increases, timely repair or maintenance should be carried out to prevent safety accidents or further damage to the machine.

　　Kind reminder: Please check the manufacturer and do not be deceived, causing unnecessary economic losses.

AfterSalesService :

• Submersible sand pump