Call to inquire about sand suction pump, high chromium alloy wear-resistant tube pump, large particle sand suction pump

Description :

　　Call to inquire about the sand suction pump, high chromium alloy wear-resistant tube pump, and large particle sand suction pump. It is a motor-driven machinery that is assembled into a motor and pump for underwater diving and operation. This product is widely used in metallurgy, chemical industry, mining, coal, electricity, building materials, municipal environmental protection, and river dredging. Enterprises use it to transport liquids containing abrasive solid particles, such as river sand, gravel, coal slag, tailings, iron sand, ore sand, etc.

　　Call to inquire about sand suction pump, high chromium alloy wear-resistant tube pump, and large particle sand suction pump. Scope of use:

　　1. River, lake, reservoir dredging, engineering,

　　2. Clean the sludge, mud, sand, and gravel in sedimentation tanks (such as sewage treatment plants, steel plants, and thermal power plants).

　　3. High temperature waste residue, boiler high-temperature slurry, heat-resistant oxide skin, and metallurgical high-temperature slurry pump discharge.

　　4. Extract ore powder and mortar from diamond sand, tailings, quartz sand, rare earths, etc.

　　5. Coastal land reclamation, sand unloading and reclamation, power station water storage and sand adjustment, etc.

　　6. Extraction and transportation of coal slurry, coal slag, power plant fly ash slurry, and coal slurry.

　　7. Transportation and desilting of various slurry materials (such as ceramics and marble powder).

　　8. Equipped with independent mixing impellers. Mainly used for environmental protection, municipal engineering, thermal power plants, coal gas coking plants, refineries, steel plants, mines, paper industry, cement plants, food plants, printing and dyeing industry, to extract concentrated liquids, heavy oil, residual oil, sewage from urban sewage channels, sludge, mortar, flowing sand and flowing sludge, as well as fluids and corrosive liquids containing mud, sand and slag.

　　Model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible cement sand pump [h] 100- rated flow rate (m3/h)

　　28- Rated head (m)

　　15- Rated power of electric motor (Kw)

　　CSQX: Stainless Steel Submersible Mud Pump CSQL: Self Cooling Submersible Mud Pump

　　CSQR: High temperature resistant submersible cement sand pump CSQRX: High temperature resistant stainless steel submersible cement sand pump

　　Call to inquire about the use conditions of high chromium alloy wear-resistant tube pump and large particle sand pump for sand suction pump:

　　1. The power supply is 50Hz, 380V three-phase AC power supply (customized 60HZ is required).

　　2. The temperature of the medium should not exceed 60 ℃, and high-temperature resistant media should not exceed 140 ℃, and the medium should not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. The diving depth of the unit shall not exceed 60 meters, and the small diving depth must be submerged in the motor.

　　5. Make the device work vertically in the medium, and the operation mode is continuous operation.

　　Structural features:

　　1. In addition to the main impeller, there is also an independent mixing impeller that can mix the mud, silt, ore, etc. deposited at the bottom of the water into a slurry and extract it.

　　2. The overflow components such as impellers and mixing impellers are made of high hardness, high chromium cast steel, which has the characteristics of wear resistance, corrosion resistance, strong drainage ability, and can pass through large solid particles. .

　　3. The motor dives into the water without being limited by the suction stroke, with high slag absorption rate and more thorough sediment extraction.

　　Call to inquire about the precautions of high chromium alloy wear-resistant tube pump and large particle sand pump for sand suction pump

　　When using a pump, due to the actual head being lower than the rated head, it should be noted that the current should not exceed the rated current. If it exceeds, the flow rate or concentration should be reduced.

　　2. During use, pay attention to preventing the solid medium around the sand pump from collapsing and burying the sand pump.

　　If the extracted solid medium does not collapse or the layer is very thin, it is necessary to continuously move the sand pump to achieve the purpose of continuous suction of solid medium, but the solid content will decrease.

　　If the medium contains small stones, it will affect the efficiency of the sand pump and reduce the solid content.

　　5. Large stones can even block the grid of the sand pump, affecting the pump's water output and solid content.

　　Call to inquire about the main performance of high chromium alloy wear-resistant tube pump and large particle sand pump for sand suction pump:

　　1. The overall equipment is simple, without the need for auxiliary mixing or injection devices, easy to operate, and reduces the total investment per unit.

　　2. The overflow components such as impellers and mixing impellers are made of high hardness and high chromium cast steel, which has the functions of wear resistance, corrosion resistance, and sand removal.

　　3. The channel is wide and has good anti clogging performance, which can pass through larger solid slag particles.

　　4. The sealing components of the pump are made of hard alloy mechanical seals, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor.

　　5. The motor submerges into the water without being limited by the suction stroke, with high slag absorption rate and more thorough extraction of mud and sand.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer. ）Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

AfterSalesService :

• Call to inquire about sand suction pump