Submersible Sand Pump - Manufacturer of Submersible Sand Pump

Description :

　　Submersible sand pump - The electric motor and pump of the submersible sand pump manufacturer are coaxially immersed in water. The flow components of the pump are made of high alloy wear-resistant materials, which have good wear resistance. The flow channel is large and used for transporting river sand, gravel, coal slag, and tailings. Liquids containing abrasive solid particles, such as ores, iron sands, and minerals.

　　Submersible sand pump - Technical parameters of submersible sand pump manufacturer:

　　Power: 3KW-132KW Flow: 10-2200m3/h

　　Head: 5-60m Speed: 1440r/min, 980r/min

　　Caliber: 50mm-300mm Temperature: -15 ℃ -+140 ℃

　　Particle size: within 5cm Material: high wear-resistant alloy (Cr26)

　　structural characteristics

　　1. The whole machine is a dry pump with a lower pump structure. The motor is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the interior of the motor.

　　In addition to the main impeller, there is also a stirring impeller that can stir the slag deposited on the bottom of the water into turbulence and extract it.

　　3. The main flow components such as impellers and stirring impellers are made of highly wear-resistant materials, which have the ability to resist wear, corrosion, blockage, and strong drainage, and can effectively pass through larger solid particles.

　　4. Unrestricted by suction range, high slag suction efficiency, and more thorough dredging.

　　5. No need to equip auxiliary vacuum pumps, reducing investment.

　　6. No need to equip auxiliary mixing or spraying devices, making the operation simpler.

　　7. The motor is submerged in water, eliminating the need for complex grounding protection and fixing devices, making management easier.

　　8. The stirring impeller directly contacts the sedimentary surface, and the concentration is controlled by the diving depth, making concentration control more flexible.

　　9. The equipment works directly underwater without noise and vibration, making the site cleaner.

　　From the drive end, the rotation direction of the pump is clockwise.

　　The main features are as follows:

　　1. Used in industries such as metallurgy, mining, power plants, chemical engineering, etc

　　2. High system pressure, circulation, cooling

　　3. Clean water, sewage, and wastewater containing impurities

　　4. Acid, alkali, and other corrosive media (stainless steel)

　　Submersible sand pump - Characteristics of submersible sand pump manufacturers:

　　1. It has the same high efficiency performance as ordinary water purification pumps.

　　2. Provide a range of models (50-350 movements) suitable for various applications.

　　3. The pump body and impeller are made of wear-resistant materials and can be used to transport media containing iron oxide scale, mud, and sand.

　　4. The use of alloy copper, silicon carbide materials, and oil lubricated dual end mechanical seals can provide comprehensive and effective waterproof performance.

　　5. The built-in motor protector can prevent the motor from burning out due to overload, paper jam, phase loss, water leakage, and other reasons.

　　6. Equipped with an automatic connection device, it can be easily installed, hoisted, and lifted. Repair.

　　7. Pumps equipped with automatic control cabinets can perform automatic alternating operations.

　　8. The bottom of the wear-resistant submersible cement slurry pump is equipped with a flushing device. When the electric motor rotates, the flushing device will generate rotational impact on the surrounding medium, which can effectively stir and discharge the sediment around. According to the size of the pump, the effective impact range can reach 10m2 to 100m2.

　　Submersible sand pump - Operating conditions for manufacturers of submersible sand pumps:

　　1. The power supply is a 50Hz/380V three-phase AC power supply

　　2. The high temperature of the medium shall not exceed 60 ℃, and the medium shall not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% for ash and 60% for slag.

　　4. Diving depth of the crew: not more than 20 meters, not less than 1 meter.

　　5. The working position of the unit in the medium is vertical, and the working state is continuous.

AfterSalesService :

• Submersible sand pump