6-inch submersible sand pump, Ruiyu mixing sand pump manufacturer

Description :

　　The 6-inch submersible sand pump, Ruiyu mixing sand pump manufacturer, is a product of our factory. Our factory not only produces high wear-resistant mud pumps, but also high-temperature resistant mud pumps, stainless steel slurry pumps, excavator hydraulic dredging pumps, etc. Need to customize various materials; It is used for efficient and high concentration extraction of media such as sand, gravel, mud, sewage, etc. And the bottom is equipped with a stirring impeller, which can vigorously stir the yellow sand and silt settled at the bottom of the water into a slurry and pump it at the same time.

　　6-inch submersible sand pump Ruiyu mixing sand pump manufacturer model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible mud pump

　　100 rated flow rate (m3/h)

　　28- Rated head (m)

　　15- Rated power of motor (Kw)

　　CSQX: Stainless Steel Submersible Mud Pump CSQL: Self Cooling Submersible Mud Pump

　　CSQR: High temperature resistant submersible mud pump CSQRX: High temperature resistant stainless steel submersible mud pump

　　Technical Specifications:

　　Power: 3KW-132KW Flow: 10-2200m3/h

　　Head: 5-60m Speed: 1440r/min, 980r/min

　　Caliber: 50mm-300mm Temperature: -15 ℃ -+140 ℃

　　Particle size: within 5cm Material: wear-resistant alloy

　　Specific application scope:

　　1. Smelting plant: transportation and discharge of various smelting waste residues and tailings sludge.

　　2. Mining, beneficiation, and sand and gravel factories: tailings transportation, various tailings, slurries, coal slurries, slag, slag processing, etc.

　　3. Coal preparation plant: transportation and discharge of coal slurry, coal slurry and slag after coal washing.

　　4. Ceramic and glass factories: transportation of ceramic sand, transportation and discharge of glass slag, etc.

　　5. Steel factory: transportation of scale, slag, rust, corrosive liquids, etc.

　　6. Water conservancy engineering: dredging of river channels, removal of silt from reservoir dams, dredging of riverbed sediment, treatment of sand and gravel at the bottom of hydropower stations, etc.

　　7. Sewage treatment plant: oxidation ditch sedimentation tank, sludge cleaning

　　8. In thermal power plants: discharge coal slag, coal slag or ash into sedimentation tanks.

　　9. In the distillery: Remove wine residue and impurities from the distillery.

　　6-inch submersible sand pump, Ruiyu mixing sand pump manufacturer, usage conditions:

　　1. The power supply is 50Hz, 60Hz/230V, 380V, 480V, 660V, 1140V three-phase AC power supply, and the capacity of the distribution transformer is 2-3 times the fixed electrical capacity.

　　The working position in the medium is vertical, and the working state is continuous.

　　3. Diving depth: not exceeding 60 meters, the small diving depth depends on the diving motor.

　　4. Solid particle concentration in the medium: ash content is 45%, slag is 60%.

　　5. The temperature of ordinary type should not exceed 60 ℃, and the temperature of R type (high temperature resistant) should not exceed 140 ℃, and it does not contain flammable and explosive gases.

　　Structural features:

　　1. The overall equipment is simple, without the need for auxiliary mixing or spraying devices, easy to operate, and reduces the total investment of the unit.

　　2. The flow components such as impellers and mixing impellers are made of high hardness and high chromium cast steel, which is wear-resistant, corrosion-resistant, has strong slag discharge capacity, and can absorb large solid particles.

　　3. The flow channel is wide and smooth, with good anti clogging performance and superior cavitation performance.

　　4. The overcurrent components are made of special materials with good wear and corrosion resistance, and have undergone special treatment.

　　5. The pump adopts a hard alloy mechanical seal for sealing.

　　Manufacturer of wear-resistant sand pumps. One year warranty, if not satisfied, return directly. High chromium alloy wear-resistant sand pump model online consultation, we have the strength to have good prices! Wear resistant sand pump prices, compare and choose! Not just giving you a choice of price! Each high wear-resistant pump produced ensures that the steel saw does not move, and the pump can operate continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　This quotation is for reference only. The price varies depending on the power size. Please call us for more information!

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer. ）Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

AfterSalesService :

• 6-inch submersible sand pump