Submersible sand pump, wear-resistant sand pump, small mud sand pump manufacturer

Description :

　　Submersible sand pump wear-resistant sand pump small mud sand pump manufacturer is an electric machinery, which is assembled by an electric motor and a pump immersed in water. This product is widely used in metallurgy, chemical industry, mining, coal, electricity, building materials, municipal environmental protection, and river dredging. River sand, gravel, coal slag, tailings, iron sand, mineral sand, and other liquids containing abrasive solid particles.

　　Submersible sand pump wear-resistant sand pump small mud sand pump manufacturer technical parameters:

　　Power: 3KW-132KW Flow: 10-2200m3/h

　　Head: 5-60m Speed: 1440r/min, 980r/min

　　Caliber: 50mm-300mm Temperature: -15 ℃ -+140 ℃

　　Particle size: within 5cm Material: high wear-resistant alloy (Cr26)

　　structural characteristics

　　1. The whole machine is a dry pump with a lower pump structure. The motor is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the interior of the motor.

　　In addition to the main impeller, there is also a stirring impeller that can stir the slag deposited on the bottom of the water into turbulence and extract it.

　　3. The main flow components such as impellers and stirring impellers are made of highly wear-resistant materials, which have the ability to resist wear, corrosion, blockage, and strong drainage, and can effectively pass through larger solid particles.

　　4. Unrestricted by suction range, high slag suction efficiency, and more thorough dredging.

　　5. No need to equip auxiliary vacuum pumps, reducing investment.

　　6. No need to equip auxiliary mixing or spraying devices, making the operation simpler.

　　7. The motor is submerged in water, eliminating the need for complex grounding protection and fixing devices, making management easier.

　　8. The stirring impeller directly contacts the sedimentary surface, and the concentration is controlled by the diving depth, making concentration control more flexible.

　　9. The equipment works directly underwater without noise and vibration, making the site cleaner.

　　From the drive end, the rotation direction of the pump is clockwise.

　　The main characteristics of submersible sand pumps, wear-resistant sand pumps, and small mud and sand pump manufacturers are as follows:

　　1. Used in industries such as metallurgy, mining, power plants, chemical engineering, etc

　　2. High system pressure, circulation, cooling

　　3. Clean water, sewage, and wastewater containing impurities

　　4. Acid, alkali, and other corrosive media (stainless steel)

　　Features:

　　1. It has the same high efficiency performance as ordinary water purification pumps.

　　2. Provide a range of models (50-350 movements) suitable for various applications.

　　3. The pump body and impeller are made of wear-resistant materials and can be used to transport media containing iron oxide scale, mud, and sand.

　　4. The use of alloy copper, silicon carbide materials, and oil lubricated dual end mechanical seals can provide comprehensive and effective waterproof performance.

　　5. The built-in motor protector can prevent the motor from burning out due to overload, paper jam, phase loss, water leakage, and other reasons.

　　6. Equipped with an automatic connection device, it can be easily installed, hoisted, and lifted. Repair.

　　7. Pumps equipped with automatic control cabinets can perform automatic alternating operations.

　　8. The bottom of the wear-resistant submersible cement slurry pump is equipped with a flushing device. When the electric motor rotates, the flushing device will generate rotational impact on the surrounding medium, which can effectively stir and discharge the sediment around. According to the size of the pump, the effective impact range can reach 10m2 to 100m2.

　　Submersible sand pump, wear-resistant sand pump, small mud sand pump manufacturer, usage conditions:

　　1. The power supply is a 50Hz/380V three-phase AC power supply

　　2. The high temperature of the medium shall not exceed 60 ℃, and the medium shall not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% for ash and 60% for slag.

　　4. Diving depth of the crew: not more than 20 meters, not less than 1 meter.

　　5. The working position of the unit in the medium is vertical, and the working state is continuous.

AfterSalesService :

• Submersible sand pump