Manufacturer supplied sand pump, submersible slurry sand pump, riverbed sand pump

Description :

　　The manufacturer supplies a submersible slurry sand pump, a riverbed sand pump, which is an electric machinery assembled from an electric motor and a pump immersed in water. This product is widely used in metallurgy, chemical industry, mining, coal, electricity, building materials, municipal environmental protection, and river dredging. River sand, gravel, coal slag, tailings, iron sand, mineral sand, and other liquids containing abrasive solid particles.

The method for supplying submersible slurry sand pumps and riverbed sand pumps is as follows:

　　1. Master whether the on-site conditions are consistent with the usage conditions (voltage, frequency, water quality, power capacity, etc.).

　　2. Choose the specifications and model of the sand pump

　　1) Preliminary selection of flow rate: Determine the flow rate of the sand pump as needed.

　　3) Calculation of pipeline loss: Calculate pipeline loss based on pipeline length, number of bends and valves.

　　4) Calculation of pump head: Sand pump head=vertical height difference from water surface to outlet+pipeline loss+safety margin (10%).

　　5) Determine the specific model of sand pump based on flow rate and head

　　6) Determine installation method: fixed, mobile.

　　Tailings pumping for mineral processing: Based on the requirements of comprehensive utilization of mineral resources and environmental protection, as well as the potential economic value of tailings utilization brought about by technological progress, old tailings are re selected for recycling. Elements such as tailings used for underground filling are becoming increasingly popular. The traditional excavator excavation, belt conveyor, and silo feeding methods not only require high investment, but also have high operating costs.

　　Manufacturer supplied sand pump, submersible slurry sand pump, riverbed sand pump, usage conditions:

　　1. The power supply is 50Hz, 60Hz/230V, 380V, 415V, 660V, 1140V three-phase AC power supply, and the capacity of the distribution transformer is 2-3 times the rated capacity. engine.

　　The working position of the device in the medium is vertical, and the working state is continuous.

　　3. Diving depth of the crew: not exceeding 50 meters.

　　4. The weight concentration of solid particles in the medium is 45% for sediment and 60% for slag.

　　5. The temperature of the medium shall not exceed 50 ° C, and the R-type (high temperature resistant) shall not exceed 140 ° C. It does not contain flammable and explosive gases.

　　Application:

　　1. Transport tailings, slag, and slurry in the beneficiation plant.

　　2. Removal of coal slag, coal slurry, and coal slurry.

　　3. Transportation of fly ash, coal slurry, and coal slurry in power plants.

　　4. Absorb various solid particles of corundum, quartz sand, and steel slag.

　　5. Mineral processing, gold mining, and iron sand extraction.

　　6. Mining tailings sand from tailings ponds for reuse, improving resource utilization, enhancing production efficiency, and saving production costs.

　　7. Discharge of ore, tailings, mortar, and slag from dams or mines.

　　Manufacturer supplied sand pump, submersible slurry sand pump, riverbed sand pump, performance:

　　1. The overall equipment is simple, no auxiliary mixing device or spray device is required, the operation is simple, and the total investment of the device is reduced.

　　2. The flow components such as impellers and stirring impellers are made of high hardness and high chromium cast steel, which has wear resistance, corrosion resistance, and strong sand removal ability.

　　3. The flow channel is wide, with good anti blocking performance, and can pass through large solid slag particles.

　　4. The pump adopts a hard alloy mechanical seal, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor.

　　5. The motor submerges into the water without being limited by the suction range, resulting in a high slag absorption rate and more thorough dredging

　　One year warranty/wooden box packaging, available or customizable. For more details, please call us for consultation!

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

Reminder: Recently, many peers have stolen company product images, attracted customers with low prices, deceived consumers with ordinary sand pumps, or directly modified sewage pumps (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer.

　　Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

　　Friendly reminder: Please identify the manufacturer and do not be deceived and cause unnecessary economic losses.

AfterSalesService :

• sand pump