Manufacturers of hydraulic sand pumps for excavators, vertical mixing sand pumps, and submersible sand pumps

Description :

　　Excavator hydraulic sand pump, vertical mixing sand pump, and submersible sand pump manufacturers are suitable for domestic, European, American, Japanese, Korean, and other large, medium, and small excavators. It can also be equipped with a hydraulic pump station. The overcurrent components are cast from high wear-resistant alloy materials, which have high strength, wear resistance, good passability, and high efficiency. This product is driven by the hydraulic system of an excavator and is used for transporting liquids containing solid particles such as river sand, mud, gravel, coal slag, tailings, iron sand, and ore.

　　The YSZ series hydraulic driven submersible mud pump is another newly developed product of our company. It is mainly used as an auxiliary device for excavators. When mud and water are not suitable for excavation, it will replace the grab bucket. The hydraulic system of the excavator itself drives the water pump to extract granular fluids such as sand, silt, mortar, etc. In addition, it can also be equipped with a hydraulic station.

　　The overcurrent component is made of high-strength wear-resistant alloy material, which has good wear resistance and a large flow channel. It is suitable for transporting dust, slurry, coal slurry, and gravel containing large solid particles. Waiting for the media. In addition, a set of stirring impellers has been added at the bottom of the pump, which can spray the deposited sludge into the turbulent flow and achieve high concentration transportation without the need for auxiliary equipment.

　　Hydraulic sand pump for excavators, vertical mixing sand pump, and submersible sand pump manufacturers. Working principle:

　　YSZ hydraulic sand pump is a new type of submersible sand pump, powered by a hydraulic system with a motor as the actuator, and converts hydraulic energy into mechanical energy. During operation, the rotation of the impeller is stirred by the water pump, and energy is transferred to the slurry medium, thereby generating a certain flow rate and driving the flow of solid impurities, achieving the transportation of the slurry.

　　The hydraulic motor has chosen the CMZ series household high-speed gear motor. The motor adopts axial compensation and radial tracking compensation, which reduces the high voltage area and radial force, and can extend the service life. Good performance, high efficiency, and stable operation. Depending on the system, electric motors with displacement of 32ml, 40ml, 50ml and rated pressure of 25MPa can be selected.

　　Hydraulic sand pump for excavators, vertical mixing sand pump, and submersible sand pump manufacturers. Main characteristics:

　　1. The bottom of the pump is equipped with a stirring impeller, which can prevent large solid blocks from blocking the pump, allowing solid and liquid to mix thoroughly and making it easier to operate.

　　2. The pump can handle solid materials with a particle size of 50mm, and the solid-liquid extraction concentration can reach over 70%;

　　Attention: Due to different working conditions, the output of the pump may also vary with the medium being processed. The operation, conveying distance, and other factors may vary.

　　3. The equipment is mainly installed on excavators. The power is provided by the hydraulic station of the excavator. It can achieve free transfer and its power source is a diesel engine. It can solve the problem of inconvenient electricity during construction in remote areas.

　　4. Fragile parts: All made of hard chromium alloy.

　　Advantages of excavator hydraulic sand pump, vertical mixing sand pump, and submersible sand pump manufacturers: Compared with electric submersible sand pumps, they have the following advantages:

　　1. The hydraulic drive device has low inertia, fast response speed, and can achieve stepless speed regulation.

　　2. It can automatically implement overload protection without causing the motor to burn out;

　　3. The solid concentration of extracted mortar, mud, slag, and other solids is very high, reaching over 70%;

　　4. It is connected to excavators and other hydraulic systems. On the machine, free transition can be achieved, especially in remote areas where the advantage is more pronounced when power is insufficient;

　　5. It can be used as an accessory for excavators, and can be extracted when excavation is unfavorable and the distance is long. Conveying to increase the value of excavators;

　　Main purposes:

　　1. Dredging of ports, rivers, and lakes, and removal of sediment pumps;

　　2. Extracting sediment, gravel, etc. for harbor construction projects;

　　3. Slag (such as iron ore, tailings ponds, beneficiation plants), sludge discharge, and all solutions containing solid substances;

　　4. Used in industries such as metallurgy and steel to extract high concentration tailings, waste residue, high-temperature iron slag, iron filings, etc;

　　5. Sand mining, gold mining, etc.

AfterSalesService :

• Excavator hydraulic sand pump