Ultrasonic cleaning machine for bottle caps, automatic degreasing, cleaning, and drying line for aluminum tubes and cans

Description :

　　Ultrasonic cleaning machine for bottle caps, automatic degreasing, cleaning, and drying line for aluminum tubes and cans

　　The ultrasonic cleaning machine for bottle caps and the automatic degreasing and cleaning line for aluminum tubes and cans have many advantages such as reliable structure, low failure rate, fast cleaning rhythm, good stability, strong compatibility, adaptability to new products, and good cleaning effect. They are suitable for large quantities of bottle cap products and workpieces with high cleanliness requirements.

　　Ultrasonic cleaning machine for bottle caps, automatic degreasing, cleaning, and drying line for aluminum tubes and cans. Features:

　　① Performance: Improve cleanliness, avoid or reduce failures caused by pollution, thereby ensuring high performance, high reliability, and long service life of hydraulic system equipment.

　　② Purpose: Used for flushing and filtering pollutants generated or invaded during the manufacturing, assembly, use, and maintenance of hydraulic systems

　　③ Using the principle of ultrasonic cleaning, it is not affected by the shape of the product, and the cleaning is efficient, clean, and has no dead corners.

　　④ Reduce cleaning costs and avoid the phenomenon of manual leakage or incomplete cleaning.

　　⑤ Ultrasonic cleaning, heated air drying, no further contamination caused by mechanical contact.

　　Instructions for using ultrasonic cleaning machine:

　　oneInstallation of Ultrasonic Cleaning Machine:

　　Please refer to the installation manual of the ultrasonic cleaning machine to connect the temperature control sensor signal line, ultrasonic drive line, heater control line and other circuits between the electrical control cabinet of the cleaning machine and the host, and connect the 380VAC power supply. Install the water inlet pipe, water outlet pipe and overflow discharge pipe of the cleaning machine.

　　twoUltrasonic cleaning machine with water:

　　Add an appropriate amount of clean water to the cleaning tank, with the liquid level reaching a height that submerges the parts to be cleaned, generally not exceeding three-quarters of the cleaning tank.

　　threeUltrasonic cleaning machine heating:

　　Activate the electric heating switch and point the white scale on the water temperature adjustment knob to the appropriate temperature (around 60 ℃). The temperature of the cleaning machine should not exceed 70 ℃ during use.

　　fourUltrasonic cleaning machine with cleaning agent added:

　　When the water temperature rises to around 40 ℃, add UC-O3 component cleaning agent to the cleaning tank (usually around 5kg at a time), slowly stir the clean water to fully dissolve it (at this time, you can also start the ultrasonic wave or turn on the air blowing device for stirring).

　　fiveUltrasonic cleaning machine pretreatment:

　　Before cleaning, it is advisable to use a bamboo knife to briefly clean the dirt on the surface of the components (such as dust on the outer surface of the dust cover, and thick and easily removable oil sludge on the curved surface of the cylinder block), in order to extend the service life of the cleaning solution.

AfterSalesService :

• Bottle cap ultrasonic cleaning machine