Side hung ultrasonic vibration board, self built sink, matched with customized ultrasonic vibration board

Description :

　　Side hung ultrasonic vibration board, self built sink with ultrasonic vibration board

　　working principle：

　　The cleaning principle of ultrasonic cleaning machine is that the high-frequency oscillation signal emitted by the ultrasonic generator is converted into high-frequency mechanical oscillation by the transducer and propagated to the medium - cleaning solvent. The ultrasonic waves radiate forward in the cleaning solution, causing the liquid to flow and generate tens of thousands of tiny bubbles with a diameter of 50-500 μ m. The tiny bubbles existing in the liquid vibrate under the action of the sound field. These bubbles form and grow in the negative pressure zone where ultrasound propagates longitudinally, while in the positive pressure zone, when the sound pressure reaches a certain value, the bubbles rapidly increase and then suddenly close. And generate shock waves when the bubbles close, creating thousands of atmospheres of pressure around them, destroying insoluble pollutants and dispersing them in the cleaning solution, thus achieving the cleaning effect!

　　Overview of Side Hanging Ultrasonic Vibration Plate:

　　1. Ultrasonic cleaning vibrating plate, also known as vibrating plate, is an ultrasonic cleaning device composed of an ultrasonic transducer bonded and sealed in a stainless steel box and an ultrasonic cleaning machine. It is suitable for placement in various cleaning tanks;

　　2. The side hung ultrasonic shock plate consists of a shock plate and a generator, suitable for placement in various containers. Depending on the installation position, it can be made into three types: bottom shock, side shock, and top shock, suitable for different cleaning requirements.

　　Characteristics of Side Hanging Ultrasonic Shock Plate:

　　1. The workpiece is cleaned using an ultrasonic vibration plate with fast cleaning speed;

　　2. High cleanliness of workpieces and consistent cleanliness of all workpieces, improving production and cleaning efficiency, and saving electricity; Low failure rate.

　　After equipment cleaning, the workpiece cleaning effect is good, and deep holes, fine seams, and concealed parts of the workpiece can also be cleaned thoroughly;

　　3. Use a side mounted ultrasonic vibration plate for cleaning, ensuring no damage to the surface of the workpiece;

　　4. No need for manual contact with cleaning solution, safe and reliable, saving solvents, heat, workspace, and labor, etc;

　　5. It can be matched with factory processes such as rust prevention, phosphating, rinsing, and drying before and after.

　　Data delivery and after-sales service:

　　1. Provide product manuals, electrical schematics, and certificates of conformity along with the equipment.

　　2. The supplier provides a one-year warranty for the equipment and automatic control instruments provided (excluding human accidents), and offers discounted supply of electrical instruments and other vulnerable parts outside the warranty period.

　　3. Free debugging, installation guidance, and training for operators.

　　4. The warranty period party shall respond to the service requested by the demander within four hours and arrive at the demander's site for service within 48 hours depending on the situation. If any problems occur outside the warranty period, the supplier shall assist the purchaser in resolving them.

AfterSalesService :

• Side mounted ultrasonic vibration plate