Die casting valve body cleaning machine, mesh belt hardware accessories, ultrasonic cleaning line

Description :

　　Die casting valve body cleaning machine, mesh belt hardware accessories, ultrasonic cleaning line

　　The ultrasonic cleaning line for mesh belt hardware accessories of die-casting valve body cleaning machine is a new type of mesh belt hardware accessory ultrasonic cleaning line independently developed based on years of practical cases, actual design, production, and application experience. The product is transported to the ultrasonic cleaning stage through a conveyor belt for comprehensive cleaning, and then thoroughly cleaned with water, reducing labor costs and intensity. It is a good helper for cleaning in industrial production.

　　Reduce labor intensity: manual cleaning: harsh cleaning environment, heavy physical labor, complex mechanical parts require long cleaning time. Ultrasonic cleaning: low labor intensity, clean and orderly cleaning environment, automatic and efficient cleaning of complex parts.

　　Environmental protection and energy conservation: The ultrasonic cleaning system is equipped with a circulating filtration system, which can achieve the cyclic filtration and repeated use of cleaning solvents, which is of great significance for saving water resources, cleaning solvent costs, and improving the environmental image of enterprises.

　　Characteristics of ultrasonic cleaning line for mesh belt hardware accessories of die-casting valve body cleaning machine:

　　1. Fast speed, uniform effect, both inner and outer grooves are made of stainless steel.

　　2. Die casting valve body cleaning machine mesh belt hardware accessories ultrasonic cleaning line is a novel continuous cleaning equipment with functions such as ultrasonic cleaning, water spray rinsing, fan blowing water, and hot air drying.

　　3. Instrument working time, temperature, and power (adjustable).

　　4. The ultrasonic cleaning line for mesh belt hardware accessories of the die-casting valve body cleaning machine is a relay controlled fully automatic form. Except for manual loading and unloading of workpieces, all other process procedures are automatically completed.

　　5. The ultrasonic cleaning line for mesh belt hardware accessories of the die-casting valve body cleaning machine greatly improves production efficiency and saves costs.

　　Instructions for using ultrasonic cleaning machine:

　　oneInstallation of Ultrasonic Cleaning Machine:

　　Please refer to the installation manual of the ultrasonic cleaning machine to connect the temperature control sensor signal line, ultrasonic drive line, heater control line and other circuits between the electrical control cabinet of the cleaning machine and the host, and connect the 380VAC power supply. Install the water inlet pipe, water outlet pipe and overflow discharge pipe of the cleaning machine.

　　twoUltrasonic cleaning machine with water:

　　Add an appropriate amount of clean water to the cleaning tank, with the liquid level reaching a height that submerges the parts to be cleaned, generally not exceeding three-quarters of the cleaning tank.

　　threeUltrasonic cleaning machine heating:

　　Activate the electric heating switch and point the white scale on the water temperature adjustment knob to the appropriate temperature (around 60 ℃). The temperature of the cleaning machine should not exceed 70 ℃ during use.

　　fourUltrasonic cleaning machine with cleaning agent added:

　　When the water temperature rises to around 40 ℃, add UC-O3 component cleaning agent to the cleaning tank (usually around 5kg at a time), slowly stir the clean water to fully dissolve it (at this time, you can also start the ultrasonic wave or turn on the air blowing device for stirring).

　　fiveUltrasonic cleaning machine pretreatment:

　　Before cleaning, it is advisable to use a bamboo knife to briefly clean the dirt on the surface of the components (such as dust on the outer surface of the dust cover, and thick and easily removable oil sludge on the curved surface of the cylinder block), in order to extend the service life of the cleaning solution.

　　Ultrasonic waves can perform precise cleaning, but their ability to treat mud like pollutants is weak. Therefore, in pre-treatment, efforts should be made to remove yellow or thin mud like pollutants as much as possible.

AfterSalesService :

• Die casting valve body cleaning machine