Cosmetics aluminum accessories cleaning machine, aluminum plate, aluminum cover, aluminum sheet, ultrasonic cleaning line

Description :

　　Cosmetics aluminum accessories cleaning machine, aluminum plate, aluminum cover, aluminum sheet, ultrasonic cleaning line

　　The cosmetic aluminum parts cleaning machine, aluminum plate, aluminum cover, aluminum sheet ultrasonic cleaning line, is fully enclosed in design and adopts an assembled frame design. The main and auxiliary tanks, pipelines, valves, pumps, spray channel inner walls, and mesh belts are all made of stainless steel materials that are resistant to corresponding corrosive media; The spray pump adopts stainless steel pump; The spray room is equipped with an openable observation window. Convenient for users to observe the operation of the production line and parts, equipped with reserved maintenance doors on the non operating side for easy repair and maintenance. And there is a main exhaust outlet set at the top of the entire enclosed room, which collects all the exhaust gas, water vapor, etc. in the channel into the main air duct for centralized treatment and discharge. This not only keeps the production line clean and reasonable, but also prevents secondary pollution of workpieces by workshop dust, making full use of the site. The entire production line has undergone unique treatments in pipeline design, electrical control, selection of raw materials and components, and strives to create a clean, pollution-free, efficient, and high-quality cleaning working environment for your company.

　　Cosmetics aluminum parts cleaning machine, aluminum plate, aluminum cover, aluminum sheet ultrasonic cleaning line equipmentAdvantages:

　　1. Suitable for large quantities of aluminum accessories and workpieces with high cleanliness requirements.

　　2. Low loss: about 0.8L/h (depending on the workpiece);

　　3. Water is recycled and needs to be replaced every 10-15 days.

　　4. Low energy consumption: saving 50% electricity;

　　5. The cleaning product has high cleanliness, good dryness, and consistent color.

　　Notes:

　　·When the power is turned on, manufacturers usually indicate what power supply should be used. Typically, ultrasonic control boxes are 220V/50HZ, and heating is usually 380V/50HZ.

　　·Add water to the ultrasonic cleaning machine tank, with a water level not lower than the water level indicated by the manufacturer.

　　·Turn on the power and the ultrasound starts working.

　　Clarify the cleaning process and cleanliness requirements:

　　Determining the cleaning process involves determining the cleaning method, cleaning procedures, cleaning agents, and process parameters;

　　1. The cleaning methods usually include ultrasonic cleaning, spray cleaning, and brush cleaning. The cleaning method is mainly determined by three factors: the yield of the cleaning object, the structural characteristics of the cleaning object, and the cleanliness requirements.

　　2. The cleaning process usually includes degreasing, rinsing, acid washing, passivation (surface adjustment), phosphating, rust prevention, and drying, etc., which should be selected reasonably according to different requirements.

　　3. Choose the appropriate cleaning agent. Don't rely solely on cleaning equipment for the cleaning effect. Choosing the appropriate cleaning agent and using the same cleaning equipment can achieve twice the result with half the effort.

　　4. Determination of process parameters. Mainly to determine parameters such as process time and process medium temperature. The effective time for ultrasonic and spray cleaning is generally within 3 minutes.

AfterSalesService :

• Cosmetics Aluminum Accessories Cleaning Machine