Brake pad ultrasonic cleaning line, automotive parts steel back oil removal cleaning and drying machine

Description :

　　Brake pad ultrasonic cleaning line, automotive parts steel back oil removal cleaning and drying machine

　　The brake pad ultrasonic cleaning line and the car parts steel back oil removal cleaning and drying machine are made of 304 stainless steel, which can be designed and selected according to the customer's product size and cleaning amount, with high flexibility. According to the product's process, single or multiple combinations can be used to achieve different cleaning scenarios and processes. Optional processes such as spray cleaning tank, throwing drum tank, air cutting drying tank, hot air drying tank, etc. can be selected to meet all customer needs. Alkaline or weakly acidic water-based solvents can be used as cleaning agents, and titanium alloys can also be used for acid and alkali resistant production according to customer requirements. According to the needs, the ultrasonic transducer can be flexibly installed at the bottom of the groove or on both sides of the groove body, making it convenient for users to maintain and use.

　　Characteristics of ultrasonic cleaning line equipment for brake pads:

　　1. Brake pad ultrasonic cleaning line, automotive parts steel back oil removal cleaning and drying machine can continuously and massively clean multiple types of workpieces, with high automation and convenient operation and maintenance.

　　2. Brake pad ultrasonic cleaning line, automotive parts steel back oil removal cleaning and drying machine, with functions such as cleaning, oil removal, circulating filtration, time control, heating, drying, and temperature control,

　　2. Brake pad ultrasonic cleaning line, automotive parts steel back oil removal cleaning and drying machine is an ideal cleaning machine equipment with high efficiency, energy saving, and cost-effectiveness.

　　3. The entire machine is made of stainless steel material, and the conveyor chain is customized according to the needs of the workpiece, which facilitates the operation of the product;

　　4. Equipped with bottom vibration ultrasonic waves separately, making cleaning products faster and cleaner;

　　5. The transmission method adopts an inorganic speed regulating motor to drive the chain, which is easy to operate;

　　6. The whole machine can be operated automatically with one click or manually in sections.

　　Instructions for using ultrasonic cleaning machine:

　　oneInstallation of Ultrasonic Cleaning Machine:

　　Please refer to the installation manual of the ultrasonic cleaning machine to connect the temperature control sensor signal line, ultrasonic drive line, heater control line and other circuits between the electrical control cabinet of the cleaning machine and the host, and connect the 380VAC power supply. Install the water inlet pipe, water outlet pipe and overflow discharge pipe of the cleaning machine.

　　twoUltrasonic cleaning machine with water:

　　Add an appropriate amount of clean water to the cleaning tank, with the liquid level reaching a height that submerges the parts to be cleaned, generally not exceeding three-quarters of the cleaning tank.

　　threeUltrasonic cleaning machine heating:

　　Activate the electric heating switch and point the white scale on the water temperature adjustment knob to the appropriate temperature (around 60 ℃). The temperature of the cleaning machine should not exceed 70 ℃ during use.

　　fourUltrasonic cleaning machine with cleaning agent added:

　　When the water temperature rises to around 40 ℃, add UC-O3 component cleaning agent to the cleaning tank (usually around 5kg at a time), slowly stir the clean water to fully dissolve it (at this time, you can also start the ultrasonic wave or turn on the air blowing device for stirring).

　　fiveUltrasonic cleaning machine pretreatment:

　　Before cleaning, it is advisable to use a bamboo knife to briefly clean the dirt on the surface of the components (such as dust on the outer surface of the dust cover, and thick and easily removable oil sludge on the curved surface of the cylinder block), in order to extend the service life of the cleaning solution.

　　Ultrasonic waves can perform precise cleaning, but their ability to treat mud like pollutants is weak. Therefore, in pre-treatment, efforts should be made to remove yellow or thin mud like pollutants as much as possible.

AfterSalesService :

• Brake pad ultrasonic cleaning line