Xiantai Hardware Cleaning Machine Casting Aluminum Parts Oil Removal Ultrasonic Cleaning Line

Description :

　　Hardware cleaning machine, ultrasonic cleaning line for removing oil from cast aluminum parts

　　The hardware cleaning machine and ultrasonic cleaning line for removing oil from cast aluminum parts use a dedicated stainless steel SUS304 mesh belt to comprehensively clean and dry the products. The cleaning efficiency is high, and it is not easy to collide or squeeze, and it is also easy to cut and dry, thus saving electricity; Reduce the failure rate and gain a deeper understanding of the practical and effective design of the oil removal and filtration system; The overall appearance of the machine is simple and beautiful.

　　Hardware cleaning machine, ultrasonic cleaning line for removing oil from cast aluminum parts, cleaning process:

　　Process flow: feeding → ultrasonic rough washing (with filtered return water) → ultrasonic fine washing → bubbling water → fan cutting water (or compressed air) → drying → discharging.

　　The structural composition of ultrasonic cleaning line for removing oil from cast aluminum parts using hardware cleaning machine:

　　The ultrasonic cleaning line for removing oil from cast aluminum parts in a hardware cleaning machine consists of a machine chamber, a storage tank system, a conveyor chain and transmission system, an ultrasonic coarse cleaning system, an ultrasonic fine cleaning system, a water passing system, a water cutting system, a drying system, a filtering system, a heating system, an electrical control system, etc.

　　Ultrasonic cleaning section: uses ultrasonic waves to clean surface oil and wax stains. The ultrasonic cleaning section is equipped with a heating system, oil isolation system, water filtration and circulation system, etc;

　　Bubble cleaning section: Using a high-pressure circulation pump to generate high-pressure airflow, violent water bubbles are generated in the water through bubble tubes arranged in a matrix at the bottom of the tank. With the help of bubble cleaning agents, various dirt on the surface of the workpiece is cleaned.

　　Wind cutting: Use a wind knife to blow dry water stains on the surface of hardware and cast aluminum parts;

　　Drying: drying the water film on the surface of the workpiece;

　　After sales service: After the machine passes the self acceptance inspection, it is guaranteed for one year. This equipment is customized for non-standard production, with fast repair speed and long-term technical maintenance provided

　　Production cycle: The production cycle is one month, and a complete cleaning technology solution is provided

　　Customer review: This device has received widespread praise from customers, with a cleaning yield of 95%. The machine is durable, has a low failure rate, and is easy to maintain! The online quotation is for reference only. Please feel free to inquire by phone.

AfterSalesService :

• Hardware cleaning machine