Boret Park Mini Train Sightseeing and Tourism Equipment

Description :

　　Adding sightseeing trains in scenic areas has effectively solved the problem of tourists consuming physical energy, providing them with more physical support for their upcoming activities. After visiting small train scenic spots, parks, and other places, it also greatly helps to enhance the attractiveness of the scenic spots. After all, the use of small trains for sightseeing in scenic spots is still a very new thing so far.

　　The sightseeing train will greatly attract tourists to come, and tourists' selfies and social media will greatly promote the popularity of the scenic spot. The sightseeing train can be used in conjunction with other modes of transportation to achieve travel between different tourist attractions. The electric and trackless design of the sightseeing train allows it to be environmentally friendly

　　It can adapt well to various venues and is easy and convenient to operate. During the operation of the sightseeing train, there will inevitably be some unexpected situations, such as tire puncture, leakage or blowout. In this case, we need to help the sightseeing train replace the tires. These tips can save time and effort in quickly changing the number of tires.

　　We loosen the screw caps and lift the sightseeing train. If there is a cover on the wheel rim, we need to pry it out first so that we can see several screw caps on the wheel rim. Loosen it slightly with a wrench (only slightly loosen, do not unscrew the screw cap completely, as this may cause the wheels to suddenly loosen and the vehicle to tilt due to losing balance)

　　Causing danger. After completion, use a jack to lift the car body. Generally, there will be a crossbeam at the bottom of the car with two notches on it, and the position of the jack is between the two notches. Loosen the screw cap and remove the tire. Since the screw cap was already loosened when the tire touched the ground, it is easy to remove all the screws after lifting the car

　　Lower the tire.

　　We replace the tire with a new one, screw on the screw cap to put the new tire in its original position, and slightly tighten the screw cap in diagonal order to ensure that the force on each screw cap is relatively even. Lower the car body, tighten the screw cap. Lower the car body, remove the jack, and tighten the screw cap again in diagonal order. At this point, the screw cap should be tightened with greater force

　　Tight to ensure that the tires do not come off while driving. We need to regularly check the spare tire to see if it is leaking, and we need to rotate the tire frequently.

AfterSalesService :

• Park Train