Automated paint production line

Description :

　　Characteristics of painting equipment

　　(1) Coating equipment cannot do without solvents, and many components need to be solvent resistant.

　　(2) Coatings are flammable and explosive materials, and many parts of equipment need to be treated with flame retardant and explosion-proof measures.

　　(3) The painting process requires precision and high equipment accuracy

　　(4) The equipment load is low and there are few heavy equipment.

　　(5) Painting equipment is relatively easy to plan assembly line production methods, saving labor.

　　(6) The running speed is relatively slow.

　　Requirements for the use of coating equipment

　　(1) Any process that uses toxic, toxic, or flammable substances should be placed in a separate factory or arranged in a specially separated area within the factory, and equipped with personal protective equipment and fire-fighting equipment.

　　(2) The passages in the workshop should be equipped with facilities to eliminate ventilation and prevent the spread of fire, such as automatic fire doors, fire and smoke barriers, water curtains, etc.

　　(3) When it is necessary to safely reach the work position above the equipment, a pedestrian bridge with protective railings and stairs should be installed. Anti slip flooring should be installed on the factory floor and pedestrian walkways.

　　(4) There should be no stacking of equipment, objects, or wires crossing the pedestrian walkway, and the width of the walkway should not be less than 1m

　　(5) A protective net must be laid below the assembly line walking above the work area to prevent objects from falling.

　　(6) Excess paint and waste paint should be isolated and stored in the paint warehouse.

　　Latex paint coating equipment changes the traditional high-speed dispersion and sanding process, and can independently complete the entire process of emulsification, dispersion, grinding, refinement, filtration, automatic suction, and fully automatic filling. The equipment can produce both water-based coatings and paints and adhesives. The complete set of coating equipment adopts automatic metering, automatic batching, blue sanding, pipeline emulsification, automatic filling, electronic control, and pneumatic sealing in the coating production process. A process from feeding to discharging finished products. The coating equipment is specially designed with a combined emulsifying head structure, which uses a high-speed rotating rotor and a precise stator working chamber to fully disperse and emulsify the material, thereby refining the material. Ensure that the processed material operates without dead corners in various viscosity states of high, medium, and low.

AfterSalesService :

• Automated paint production line