Manufacturer of a complete set of coating equipment with an annual output of 5000 tons and a coating production line

Description :

　　Coating equipment can independently complete the entire process of emulsification, dispersion, grinding, refinement, cooling, filtration, vacuum automatic suction, and semi-automatic filling. Pulping and painting are completed in the same tank. This complete set of coating equipment can produce both water-based coatings and paints and adhesives. The complete set of coating equipment adopts a fully automatic device, with high shear emulsification dispersion, vacuum suction, vacuum defoaming, and automatic filling process flow, from feeding to discharging the finished product in one process.

　　Latex paint coating equipment changes the traditional high-speed dispersion and sanding process, and can independently complete the entire process of emulsification, dispersion, grinding, refinement, filtration, automatic suction, and fully automatic filling. The equipment can produce both water-based coatings and paints and adhesives. The complete set of coating equipment adopts automatic metering, automatic batching, blue sanding, pipeline emulsification, automatic filling, electronic control, and pneumatic sealing in the coating production process. A process from feeding to discharging finished products. The coating equipment is specially designed with a combined emulsifying head structure, which uses a high-speed rotating rotor and a precise stator working chamber to fully disperse and emulsify the material, thereby refining the material. Ensure that the processed material operates without dead corners in various viscosity states of high, medium, and low.

　　Operating Procedures for Coating Equipment

　　（1） Equipment operators must be proficient in the construction, performance, operation, and maintenance methods of various machinery, and be responsible for their use by designated personnel.

　　（2） When operating woodworking machinery, it is necessary to wear work clothes, tie the cuffs tightly, and female comrades must wear work hats with braids placed inside; Do not wear gloves, scarves, etc. during operation.

　　（3） Before the machinery starts working, it must be tested and all components must operate normally before it can start working. Attention: If one or two ignition attempts fail; Okay, turn on the combustion fan for a while to exhaust the gas in the furnace before the second test run.

　　（4） The shafts, chains, pulleys, belts, and other moving parts on the equipment should be equipped with protective covers and plates.

　　（5） If there is any abnormal situation or other malfunction during mechanical operation, the power should be immediately cut off and the vehicle should be stopped for maintenance.

　　（6） The equipment is surrounded by flammable materials, and smoking and open flames should be strictly prohibited.

　　（7） When debugging and maintaining equipment, the main power supply must be cut off.

AfterSalesService :

• Annual production of 5000 tons of complete coating equipment