Complete set of coating equipment, ink coating production line

Description :

　　Coating equipment can independently complete the entire process of emulsification, dispersion, grinding, refinement, cooling, filtration, vacuum automatic suction, and semi-automatic filling. Pulping and painting are completed in the same tank. This complete set of coating equipment can produce both water-based coatings and paints and adhesives. The complete set of coating equipment adopts a fully automatic device, with high shear emulsification dispersion, vacuum suction, vacuum defoaming, and automatic filling process flow, from feeding to discharging the finished product in one process.

　　What are the color requirements for coating equipment?

　　In the process of coating walls in architecture, the participation of coating equipment is definitely required, and these equipment must be present during the coating process. In fact, their main function is to restore a more realistic coating color and evenly apply it to the surface of the wall. The common prerequisite colors are white, brown, etc., but there are also many different colors. If these equipment are not used, color deviation may occur, and this color difference can be avoided. There are hundreds of simple colors in our world, so although some colors are similar, there are also differences in some indices, and we cannot paint them with the same color. We need to follow the true colors.

　　Requirements for the use of coating equipment

　　(1) Any process that uses toxic, toxic, or flammable substances should be placed in a separate factory or arranged in a specially separated area within the factory, and equipped with personal protective equipment and fire-fighting equipment.

　　(2) The passages in the workshop should be equipped with facilities to eliminate ventilation and prevent the spread of fire, such as automatic fire doors, fire and smoke barriers, water curtains, etc.

　　(3) When it is necessary to safely reach the work position above the equipment, a pedestrian bridge with protective railings and stairs should be installed. Anti slip flooring should be installed on the factory floor and pedestrian walkways.

　　(4) There should be no stacking of equipment, objects, or wires crossing the pedestrian walkway, and the width of the walkway should not be less than 1m

　　(5) A protective net must be laid below the assembly line walking above the work area to prevent objects from falling.

　　(6) Excess paint and waste paint should be isolated and stored in the paint warehouse.

AfterSalesService :

• Complete set of coating equipment