Annual production of 50000 tons of complete coating equipment, integrated coating equipment

Description :

　　Operating Procedures for Coating Equipment

　　（1） Equipment operators must be proficient in the construction, performance, operation, and maintenance methods of various machinery, and be responsible for their use by designated personnel.

　　（2） When operating woodworking machinery, it is necessary to wear work clothes, tie the cuffs tightly, and female comrades must wear work hats with braids placed inside; Do not wear gloves, scarves, etc. during operation.

　　（3） Before the machinery starts working, it must be tested and all components must operate normally before it can start working. Attention: If one or two ignition attempts fail; Okay, turn on the combustion fan for a while to exhaust the gas in the furnace before the second test run.

　　（4） The shafts, chains, pulleys, belts, and other moving parts on the equipment should be equipped with protective covers and plates.

　　（5） If there is any abnormal situation or other malfunction during mechanical operation, the power should be immediately cut off and the vehicle should be stopped for maintenance.

　　（6） The equipment is surrounded by flammable materials, and smoking and open flames should be strictly prohibited.

　　（7） When debugging and maintaining equipment, the main power supply must be cut off.

　　What are the color requirements for coating equipment?

　　In the process of coating walls in architecture, the participation of coating equipment is definitely required, and these equipment must be present during the coating process. In fact, their main function is to restore a more realistic coating color and evenly apply it to the surface of the wall. The common prerequisite colors are white, brown, etc., but there are also many different colors. If these equipment are not used, color deviation may occur, and this color difference can be avoided. There are hundreds of simple colors in our world, so although some colors are similar, there are also differences in some indices, and we cannot paint them with the same color. We need to follow the true colors.

　　Coating equipment can independently complete the entire process of emulsification, dispersion, grinding, refinement, cooling, filtration, vacuum automatic suction, and semi-automatic filling.

　　The coating equipment adopts a process flow of liquid metering, high shear emulsification dispersion, vacuum suction, vacuum defoaming, and semi-automatic filling, with one step from feeding to discharging the finished product.

AfterSalesService :

• Annual production of 50000 tons of complete coating equipment