JRK homogenizer emulsifier cosmetic production equipment

Description :

　　The high rotational speed and shear rate of the emulsifier are important for obtaining ultrafine suspensions. According to some industry specific requirements, Yiken Company has developed the ERS2000 ultra high speed shear homogenizer on the basis of the ER2000 series. Its shear rate can exceed 100.00rpm, and the rotor speed can reach 40m/s. Within this speed range, turbulence caused by shear forces combined with specially developed motors can be utilized. The shear force is stronger, and the particle size distribution of lotion is narrower. Due to its extremely high energy density, no other auxiliary dispersing equipment is required.

　　Principle of high shear homogenization emulsifier equipment: Installed at the bottom of the container, the high shear dispersion emulsifier can provide a wide range of processing capacity inside the kettle. The specially designed sealing structure can ensure that the material does not leak and can adapt to various viscosity and process requirements. The applicable process is suitable for the dispersion, emulsification, homogenization, and mixing of materials such as cream, emulsion, and suspension agent.

　　Characteristics and Structure of Emulsifier: 1. Adopting a special type of frame type scraping and stirring device, the stirring impact force can be adjusted by a stepless frequency converter, and the speed can be adjusted arbitrarily within the range of 12-80 revolutions per minute. Turning clockwise when viewed from top to bottom can adapt to emulsification processing of various viscosity materials.

　　2. Using a special shear emulsification homogenization device, the material is strongly sucked in and squeezed and sheared by a high-speed rotating rotor. The homogenization device is installed at the center of the pot, which can naturally cause the material to roll inside the pot and eliminate dead corners, enabling the material to achieve higher quality homogenization.

　　3. Equipped with a special form of stainless steel discharge valve, it ensures that there are no dead corners at the bottom of the pot, further improving the quality of homogeneous emulsification. 4. The motor can be controlled by a variable frequency speed regulator through a variable frequency speed control device to achieve stable speed and strong torque. 5. The deceleration device adopts a cycloidal pinwheel reducer, and the lubricating oil uses 2L-2 lithium based grease. 6. The upper sealing device adopts a single end mechanical seal (sealing liquid uses glycerin). 7. The homogenization device adopts specially designed double end mechanical seals and skeleton oil seal seals to achieve ideal vacuum environment.

　　8. The emulsifying pot body is a three jacket structure, and the parts of the inner pot that come into contact with the material are made of imported stainless steel materials. The inner surface is mirror polished to 300EMSH (sanitary grade) to ensure product quality. The outer insulation layer is filled with PU insulation cotton to reduce energy consumption. There are sight glasses and vacuum sight glasses with scraper on the pot lid, spice hopper, filter, vacuum pressure gauge, etc.

　　9. All heating, cooling, stirring, homogenization control buttons and temperature measuring instruments are centralized on the control cabinet panel, making operation convenient and reliable. 10. The dissolution pot is configured according to user requirements for oil and water, and the jacket heating steam valve is manually operated. Electric heating activates the heating button. The upper vertical high shear homogenizer emulsifier or ordinary stirring device is used to uniformly heat animal materials.

　　11. This equipment is equipped with a hydraulic lifting system and an electric lifting system, which is easy to operate and can effectively emulsify materials under closed conditions. Ordinary fixed equipment does not have this lifting system.

AfterSalesService :

• JRK homogenizer emulsifier