Filling machine equipment Packaging machinery

Description :

　　Basic knowledge of using, installing, and maintaining filling machines

　　Many people may not know how to install or maintain the filling machine when using it. Today, we will introduce it to you.

　　1. Regarding the external power supply of the filling machine.

　　Generally speaking, when installing, it is recommended to use a triangular socket as much as possible. The socket is a particularly important issue, and in addition to this, attention should be paid to its leakage problem, because mechanical equipment involves electrical safety issues, so it is better to connect it to the ground wire.

　　2. We need to use armored support plates.

　　Support the filling machine well, because nowadays most manufacturers are equipped with positioning sleeves, which are very convenient and can move up and down. However, we must know that in actual use, when the core part enters or retracts, we must ensure that the positioning sleeve moves up and down without obstacles, so as to ensure its safety. Otherwise, if there are certain obstacles during the up and down process of the positioning sleeve, it will definitely not be very good.

　　3. The liquid filling machine should be set to quantitative.

　　Most of the time, we set the liquid of the filling machine to a quantitative level during use. This allows us to use fine-tuning nuts to make adjustments without the need for later settings, making it more convenient. Therefore, we hope that everyone can understand these basic things in advance when installing, using, and maintaining the machine, so that installation can be done without problems.

　　In fact, there are no particularly complicated aspects during installation. As long as attention is paid to details, there are basically no problems. Do not neglect these issues. It is necessary to carefully read the manufacturer's user manual to ensure that installation does not have any problems. It is recommended that everyone take the time to understand these aspects.

　　Isobaric filling of atmospheric pressure liquid filling machine

　　The filling machine using the isobaric method adopts isobaric filling, which uses compressed air in the upper chamber of the can to inflate the packaging container, so that the pressure of the two is almost equal, and then the liquid is poured into the container by its own weight. It is called an isobaric filling machine.

　　Normal pressure liquid filling machine is used for filling under normal pressure

　　Atmospheric pressure filling relies on pouring the liquid into the packaging container by its own weight under atmospheric pressure. The machine that fills liquid products into packaging containers under atmospheric pressure is called a water-based filling machine. The atmospheric pressure filling process is when the liquid stops, that is, when the liquid material in the container reaches the quantitative requirement, the liquid inlet automatically stops

AfterSalesService :

• Filling machine equipment