Production and supply of steam maintenance equipment and fire sprinkler pumps

Description :

　　Introduction to Steam Maintenance Equipment

　　Steam curing equipment can meet the quality standards of all-weather and all wet curing, and the curing effect is extremely significant. The spray curing device technology is a key technology for achieving large-scale standardized production of prefabricated beam segments and accelerating the construction cycle of bridges. At the same time, the spray curing device has basically achieved fully automatic control from water supply to completion of work, greatly reducing labor intensity and improving labor productivity. It has significant advantages such as low cost, easy installation and maintenance, and water conservation.

　　At any time, it is necessary to ensure that the temperature difference between the curing water poured on the concrete surface and the concrete surface temperature is less than 15C, until the concrete strength meets the design requirements. During the curing period, a dedicated person is responsible for strictly monitoring and recording the curing process. This product is suitable for curing various prefabricated beams, especially for T-beams and box beams with wing plates. The bottom of the wing plate is a key part of automatic spray curing, and the butterfly shaped nozzle can make the bottom of the wing plate fully wet when rotating. The technical indicators of curing: after the concrete formwork is removed, if the weather suddenly drops, insulation measures should be taken to prevent the surface temperature of the concrete from being affected by environmental factors (such as exposure to sunlight, sudden temperature drop, etc.) and to ensure that the temperature difference between the core and surface of the concrete, and between the surface and the environment during the curing period, does not exceed 15 ° C. The purpose of concrete curing is to provide suitable temperature and humidity for hardened concrete. Due to the high temperature in summer, the moisture in concrete Fast evaporation, prone to dehydration phenomenon

　　The connection diameter of steam curing equipment is 1/2 inch. 4 minutes (DN15); Water pressure is between 1.5-3KG; water flow rate is between 30-215L/H; Coverage area in atomized state: about 1 meter, 4-6 meters in water column state (water column range). This spray curing device is suitable for T-beams and box beams with wing plates. The bottom of the wing plate is a key part of automatic spray curing, and the butterfly shaped nozzle can make the bottom of the wing plate fully wet when rotating.

AfterSalesService :

• Steam curing equipment