SY-16 adhesive price parameters Beijing SY16 paste structure adhesive SY-16 modified epoxy adhesive has samples
Category:
fine chemicals /Synthetic adhesive/Water-based adhesive
Model:
SY-16
Brand:
Beijing Institute of Aeronautical Materials
model:
SY-16
Product Name:
SY-16 modified epoxy paste like three component structural adhesive
Hardening/curing method:
Room temperature hardening
Main types of adhesive materials:
Synthetic elastomer
substrate:
synthetic rubber
Physical form:
Paste like type
Performance Characteristics:
high and low temperature resistance
purpose:
Aviation adhesive
Place of Origin:
Beijing
manufacturer:
AVIC Beijing Institute of Aeronautical Materials
Retail Price
1,890.00USD
重量
kg
- Product Description
-
model SY-16
Product Name SY-16 modified epoxy paste like three component structural adhesive
Hardening/curing method Room temperature hardening
Main types of adhesive materials Synthetic elastomer
substrate synthetic rubber
Physical form Paste like type
Performance Characteristics high and low temperature resistance
purpose Aviation adhesive
Place of Origin Beijing
manufacturer AVIC Beijing Institute of Aeronautical Materials
Description :
SY-16 Adhesive Aviation Material Institute SY16 Modified Epoxy Paste Structural Adhesive with Sample Q/6S349-1983 Standard
SY-16 adhesive is a modified epoxy paste like three component structural adhesive. Suitable for metal, carbon fiber composite materials, graphite and other load-bearing plate to plate bonding, bonding bell bonding, bonding bolt composite connections, and can be used to fill gaps. Can be used for a long time at -55-150 ° C.
SY-16 Adhesive Components and Appearance
Component A: Epoxy resin, a yellow brown viscous liquid
Component B: Polysulfide rubber, a milky white paste like substance
Component C: Class curing agent, milky white powder
The appearance of the prepared SY-16 adhesive is a yellow brown viscous liquid.
SY-16 Adhesive Execution Standard: Q/6S349-1983 "Provisional Technical Conditions for SY-16 Adhesive"
Process Used
Pre assembly: Pre assembly is required before surface treatment of the bonded parts, and the fitting gap is generally not greater than 0.5mm.
Surface treatment: Phosphoric acid anodizing is preferred for aluminum alloys, and chemical oxidation or chromic acid anodizing treatment can also be used.
Glue dispensing and coating: Weigh according to the mass ratio of component A: component B: component C=7.5:11.5:2, and stir thoroughly until uniform. When applying adhesive, if the room temperature is low, preheat the parts to be bonded to 30-40 ° C. Alternatively, preheat the adhesive to 30 ° C before applying.
Curing: The curing conditions are a temperature of 140 ° C ± 2C for 2.0h ± 0.5h, and a pressure of 0.05~0.10MPa.
AfterSalesService :
Key words:- adhesive
More Products
