Integrated sewage pump station, buried integrated pump station, municipal water supply and drainage sewage lifting pump station

Description :

Integrated sewage pumping stationThe significant environmental significance:

　　1. Integrated pumping stations are widely used in municipal engineering, industry, or any other building that cannot rely on gravity to directly discharge wastewater into the sewage treatment system. Among them, municipal drainage is applicable to intermediate pumping stations such as sewage pumping stations, drainage pumping stations, and confluence pumping stations. Integrated pumping station is an ideal solution to replace traditional drainage pumping stations and is an integrated integrated pumping station.

　　2. The principle of an integrated pump station is to feed back the liquid level information of the pump station to the control system through pressure sensors or floating balls, and then adjust the operation of the water pump switch according to the operating parameters set by the control system. When the liquid level reaches the system set opening water pump level, the control system will control the water pump to start, so that sewage is pumped from the pump station to the outlet of the municipal sewage pipeline; When the sewage pumping is below the set liquid level of the system, the system will control the water pump to stop. This cycle repeats to ensure the smooth operation of the integrated prefabricated pump station.

　　3. Integrated pump station is a new type of integrated pump station equipment that is easy to use, reliable in quality, requires less civil engineering work, and has lower costs. Its significant feature is volume optimization.

　　4. Integrated pump stations are mainly used in municipal industrial basement drainage, subway drainage, living areas, factories, and other sewage treatment facilities located below ground level. The long-term retention of sewage in these areas can easily cause environmental pollution and seriously affect people's normal lives. By making good use of this device, the problem of sewage can be greatly improved, various environmental pressures can be alleviated, and the overall quality of domestic water can be improved.

　　5. There are many characteristics of an integrated pump station. Its structure is small, so it occupies a small area and can be installed in a concealed manner without affecting the beauty of the surrounding environment. It is also relatively easy to install. The device has strong corrosion resistance and can effectively improve its service life during application. It basically does not require daily maintenance and has a low failure rate.

Integrated sewage pumping stationadvantages

　　1. Floor area: The concrete pump station requires mutual cooperation between various suppliers and civil engineering parties, with low system integration and a large floor area; The integrated pump station has a high degree of integration and a small footprint.

　　2. Construction period: The integrated equipment of the integrated pump station is easy to transport and lift. As long as the excavation of the foundation pit is completed and the pump station bottom plate is prefabricated, the construction amount is small and the construction period is short. Generally, the installation can be completed within one week; However, traditional concrete pump stations are steel concrete structures, with the pump station floor, pool wall, and roof constructed in stages, resulting in a long construction period. Pouring and curing require 2-3 months, and on-site construction has lower precision compared to factory production of products.

　　3. Control system: Traditional concrete pumping stations require a dedicated control room to be built and managed by a dedicated person. The initial investment and later management expenses are both relatively high; The integrated pump station is an intelligent pump station equipped with an advanced dedicated monitoring system, which can achieve remote control of the pump station.

　　4. Component compatibility: The integrated pump station is prefabricated and assembled in the factory, and the responsible party is the factory. The components are highly matched to ensure that the pump station system has high working efficiency under normal operating conditions; Traditional pump stations have different components from different brands assembled together, resulting in poor matching and many unstable factors that cannot meet the hydraulic conditions of the pump station.

　　5. Service life: Traditional pump station concrete is a porous material that can react with gases and acidic biomass in the soil, making it prone to corrosion, leakage, and cracking; The integrated pump station has strong corrosion resistance and excellent toughness, and is resistant to leakage and cracking.

　　6. Anti leakage: The integrated pump station undergoes anti leakage pressure and corrosion testing before leaving the factory, with 100% corrosion resistance and no leakage or cracking; Traditional pumping stations suffer from unpredictable consequences such as cracks and fluid leaks due to unstable geological conditions and soil acidity.

　　7. Noise: The advanced design concept of integrated pump stations and high-quality water pumps ensure that prefabricated pump stations only produce extremely low noise during operation, and can be safely installed in densely populated residential areas, commercial buildings, and other places with high environmental requirements for construction; The traditional stick concrete pump station generates significant noise during the start stop and operation of the water pump, which affects the surrounding environment.

　　8. Outdoor installation requirements: The integrated pump station can be widely installed outdoors, in green belts, on roads, and other places. Especially in areas with small construction sites, high population density, and concentrated buildings, it has advantages and lower initial and later maintenance costs; Traditional pump stations require open construction space. If construction is carried out on roads and residential areas, transportation and demolition issues must be fully considered, and the initial and later maintenance costs are relatively high.

AfterSalesService :

• Integrated sewage pumping station