Prefabricated pump station, fiberglass integrated prefabricated pump station, prefabricated integrated sewage pump station manufacturer

Description :

Prefabricated pump stationAdvantages of fiberglass integrated pump station:

　　1. The overall layout should be reasonable, especially for pump stations and gate stations that combine drainage and irrigation, self discharge, self diversion, and water extraction. The layout should strive for compactness and make full use of buildings for regulation.

　　2. In the selection of pump types, efforts should be made to ensure that the design head is consistent with the rated head of the water pump and meets the requirements of irrigation and drainage flow. And try to choose technologically advanced pump types as much as possible to ensure high efficiency and low operating costs of the pump station equipment. At the same time, the selected pump type should be a relatively mature pump type with certain operational experience, and experimental pump types should be avoided as much as possible.

　　3. The selection of pump type should fully consider the purpose and working nature of the pump station. For irrigation and replenishment with long working hours in those years, a pump type with a wide range of high-efficiency zones, high efficiency, and good cavitation performance should be selected. For those mainly focused on drainage, pump types with reliable performance and simple structure should be selected.

　　4. The engineering layout should try to use forward water inlet to ensure good water inlet conditions and uniform flow for each unit. When it is necessary to adopt lateral inlet in engineering layout, the distance between the lateral inlet and the water pump should be extended as much as possible in the design, and certain diversion measures should be taken.

　　5. The design of the water outlet pool should try to avoid sharp bends that may cause water flow to collide and rise. The design of the pressure water tank should avoid the mutual impact of water flow in each outlet pipeline, which increases energy loss.

　　6. Local usable building materials should be used as much as possible. The design should ensure simple and convenient construction with minimal project investment.

Fiberglass integrated prefabricated pump stationData required for selection:

　　1. Pump station inflow Q (tons/day), coefficient of variation;

　　2. The required number and head of water pumps, one for use and one for backup or two for use and one for backup;

　　3. Outdoor floor elevation H0 (meters), relative elevation ± 0.00 (meters) can also be used;

　　4. The bottom elevation of the outer connecting pipe of the inlet pipe is H1 (meters), and the diameter of the outer connecting pipe of the inlet pipe is DN;

　　5. The elevation of the connecting pipe outside the outlet pipe is H2 (meters), and the diameter of the connecting pipe outside the outlet pipe is DN;

　　6. Selected grille type, basket grille or crushing grille;

AfterSalesService :

• Prefabricated pump station