Integrated sewage pump station fiberglass wrapped integrated sewage pump station

Description :

Integrated sewage pumping stationAdvantages and disadvantages

　　1. High security. All equipment and instruments are concentrated in the cylinder, with an inlet and outlet located at the top of the cylinder. Except for maintenance personnel, no one else can enter during normal times.

　　2 is very environmentally friendly. The cylinder is wrapped with high-strength fiberglass, with zero leakage and no pollution to groundwater; The bottom of the cylinder is designed without sedimentation, with minimal odor, and the cylinder is sealed, with almost no impact on the surrounding area.

　　3. Small footprint. Due to the highly integrated nature of integrated pumping stations, the cylinder volume is very small and occupies a very small area, usually about 1/5 of that of conventional pumping stations.

　　4. Short construction period. The integrated pump station cylinder is directly manufactured by the manufacturer, and the main pipelines and equipment have already been installed by the manufacturer. They can be transported directly to the site for installation, greatly reducing the construction period.

　　5. Long service life. The cylinder is computer-controlled and wrapped with high-strength fiberglass, with a service life of over 30 years.

　　6. High requirements for foundation pit construction. The size of the integrated pump station cylinder depends on its daily processing capacity, and its own weight and the weight of the full cylinder water have very high requirements for the construction of the foundation pit. It is necessary to consider both anti floating and anti settlement.

　　7 Engineering cost. The cost of the integrated pump station project depends on the actual situation. In general, integrated pump stations with smaller cylinder depths have lower costs, while integrated pump stations with larger cylinder depths may have higher costs.

　　Characteristics of integrated sewage lifting pump station

　　1. On demand customization: Each pump station is designed according to the parameters provided by the customer to ensure that the operating conditions of the pump station meet the requirements of use.

　　2. Advanced design: Adopting the internationally advanced CFO flow field calculation, it maximizes the discharge of solid particles such as sludge from the equipment.

　　3. Industrial control design: Adopting Schneider Electric, touch screen design, including communication RS485 interface. The pump station should have manual control, automatic control, and distance detection functions, and different control modes should be able to be freely switched between.

　　5. Accessory standards: All accessories are designed and manufactured in the factory, including pressure pipelines, maintenance platforms, inlet and outlet pipes, etc. Strict debugging is carried out before leaving the factory to ensure the reliability of the pump station.

　　6. Highly integrated: As an integrated equipment, the pump station provides a complete set of components including cylinder body, pressure pipeline, maintenance platform, maintenance ladder, grid filtration device, coupling system, pump lifting system, ventilation device, anti slip manhole cover, photo system, etc.

　　7. Beautiful appearance: The pump station is completely buried underground, with only maintenance holes and control boxes left on the ground. A landscape style management room can also be optionally placed on the ground to coordinate with the surrounding environment.

AfterSalesService :

• Integrated sewage pumping station