Integrated sewage pump station, integrated sewage lifting pump station manufacturer, production of integrated sewage treatment pump station

Description :

Integrated sewage pumping stationFeatures:

　　1. The anti slip top cover plate is made of GRP material with an outer protective layer and anti ultraviolet material to prevent aging under prolonged exposure to sunlight. The inner and outer surfaces of the cover plate are smooth, and the overall top cover has anti slip measures and is coated with anti-corrosion paint.

　　2. The aluminum alloy fiberglass prefabricated pump station cover is equipped with safety grilles, ventilation exhaust pipes, and handrails, and can also be equipped with anti-theft safety locks and pneumatic spring switches.

　　3. The fiberglass cylinder body is reinforced with alkali free glass fiber untwisted roving material, and the winding process is computer-controlled to ensure uniform layer thickness. The cylinder body has a Babbitt hardness of over 40Hba, a tensile strength of 150MPa, and a bending strength of 120Mpa. Before leaving the factory, it undergoes anti leakage testing to ensure product quality.

　　4. The main structure design life of the buried integrated sewage lifting pump station is 50 years, and the anti floating design of the base can effectively prevent the pump station from floating.

　　5. Set up a pump internal service platform according to the drawing requirements to meet daily maintenance and repair needs.

　　6. The liquid level sensor is matched with a dedicated water pump control system to achieve automatic control and operation of the pump station liquid level.

　　7. The bottom of the buried integrated sewage lifting pump station adopts a concave structure, which can resist the pressure of groundwater without deformation, achieve self-cleaning, and save the cost of manual dredging.

　　8. The underground integrated sewage lifting pump station is equipped with remote monitoring devices and intelligent control systems to achieve.

Integrated sewage lifting pump station working principle

　　1. Structural forms: modular wet well pump station, modular integrated pump station, and fully customized pump station.

　　2. Size: Design flow rate, head; The required number of water pumps, including working pumps and backup pumps; Ground elevation, inlet/outlet pipe elevation; Inlet/outlet pipe diameter.

　　3. Control system: on-site automatic liquid level control, remote control.

　　4. Liquid level sensors: pressure sensors (standard), float switches, ultrasonic liquid level sensors, etc.

　　5. Material of internal pipelines: 304 stainless steel (standard), 316 PVC

　　6. Application areas: municipal engineering, industry, construction or other indoor/outdoor, above ground or below ground, etc.

AfterSalesService :

• Integrated sewage pumping station