Integrated sewage pump station, sewage treatment integrated pump station, GPR fiberglass integrated prefabricated pump station

Description :

Integrated sewage pumping station The process characteristics and advantages of this method are applicable to the construction of urban rainwater and sewage discharge or sewage lifting pump stations. Especially suitable for the construction of pumping stations in narrow areas of public buildings such as residential buildings, office buildings, hotels, restaurants, schools, hospitals, etc.

　　The process principle is that the integrated sewage pump station cylinder is made of high-strength fiberglass reinforced plastic prefabricated cylinder, and various equipment components are integrated into this movable prefabricated cylinder. The prefabricated cylinder is vertically buried underground. Adopting an intelligent fully automatic remote control system, the water discharge is efficiently and automatically adjusted according to the storage capacity.

　　The excavation of the pump pit must be carried out according to the design drawings, and an excavation plan must be formulated. During excavation, close attention should be paid to the safety of the foundation pit. The bottom of the pump pit must be dry and free of water. If there is any, appropriate precipitation measures must be taken. Adopt appropriate foundation pit maintenance methods to avoid pump pit collapse. The bottom of the pit should be excavated flat. If necessary, a layer of stone free gravel should be laid and compacted with a compactor to achieve a compaction degree of 90% according to the compaction test results. After the excavation of the pump pit is completed, it is necessary to confirm that the on-site conditions for the inlet and outlet water pipes, connecting pipes, and cables of the pump station are met before installing the pump station.

　　Installation of cement base plate, ◎ The installation of cement base plate must be in a horizontal position, and the anchor bolts installed on the cement base plate should be placed before the pump body. The upper surface of the base plate must be polished smooth. Install the foot screws evenly at different angles within one circle. At least 4 anchor bolts should be used for installation on the cement base plate, and the anchor screws should be evenly installed. The size of the cement base plate should meet the anti floating requirements of the pump station.

　　The benefit analysis of integrated sewage pump station, firstly, the integrated sewage pump station saves costs. Compared with traditional concrete structure pump stations, it can save 45% to 75% of the total construction cost. Simplifying the planning process and contract interface can save approximately two months of construction time. The pump station is 100% leak free, pollution-free to the environment, and saves pumping costs. The integrated sewage lifting pump station features 2. It is equipped with internal air circulation function to avoid the generation of a large amount of odor inside, which affects the work of the staff.

　　3. Customized manhole, made of 304 stainless steel, with anti weathering and anti explosion design.

　　4. The bottom automatic dredging design can achieve automatic flushing of the bottom, ensuring no sediment deposition and anti-corrosion and odor prevention.

　　5. The water pump adopts a double suction submersible sewage pump, imported bearings, imported mechanical seals, and comes with leakage point protection function.

　　6. The intelligent control cabinet is made of 304 stainless steel, achieving double-layer rainproof and moisture-proof protection. The thickness of the door panel and box body is ≥ 2mm, and it is self coupled to start. Imported Schneider brand main components, including imported PLC and LCD display

AfterSalesService :

• Integrated sewage pumping station