Prefabricated pump station integrated sewage lifting pump station remote monitoring buried installation

Description :

Integrated prefabricated pump stationTo replace the old concrete water tank with a new product. Previously, concrete sewage tanks occupied a large area, caused heavy pollution, had a long construction period, and were costly. To build a sewage discharge station, one or several large concrete water tanks were required, as well as equipment rooms, pump rooms, and environmental protection greening. With the emergence of sewage pumping stations, the above drawbacks have been effectively avoided. This demonstrates the advantage of highly integrated sewage pumping stations. The cylinder of the sewage lifting pump station is made by winding resin and fiberglass raw materials, and is a cylindrical cylinder with high strength and extremely strong corrosion resistance. A submersible pump is installed at the bottom of the cylinder in a coupled manner. When the sewage upstream of the sewage lifting pump station flows into the cylinder through the pipeline network, the liquid level probe in the sewage lifting pump station will transmit a pump start signal to the control cabinet. After the pump is started, the outlet of the pump is connected to the main outlet of the pump station through a stainless steel pipeline. After the sewage is discharged, it is discharged through the pipeline network to the destination. The entire set of equipment is directly buried underground, without affecting planting and greening around it. It occupies a small area and cannot be found even if it is not nearby. No need for above ground buildings. Its airtightness will not cause odor to evaporate, and the overall equipment does not require a pump room or equipment room. It automatically starts and stops the pump and does not require manual supervision. Valves, pipelines, water pumps, maintenance platforms, control cabinets, and cables are all installed on one cylinder. This is the highly integrated nature of sewage pumping stations.

Integrated prefabricated pump stationIt is a turnkey pump station that is equipped to lift sewage, rainwater, drinking water, and wastewater. It is produced and assembled by the manufacturer and transported to the site for installation. The integrated prefabricated pump station is mainly composed of a top cover, a fiberglass reinforced plastic (GRP) cylinder, a base, a submersible pump, mechanical and electrical equipment, a service platform, pipelines, and other parts to meet the requirements of boosting and lifting drainage.

AfterSalesService :

• Prefabricated pump station