Performance and advantages of prefabricated pump station integrated prefabricated pump station

Description :

Prefabricated pump stationIt is one of the main application equipment for urban sewage treatment and flood control. The integrated prefabricated pump station is buried locally, so it occupies a small area and has a small volume, making it easy to transport and install; It can be applied to public buildings such as residential areas, office buildings, hotels, etc. It is widely used and provides convenience for the treatment of our daily sewage and rainwater.

　　The basic structure and working principle of a prefabricated pump station is: a wrapped fiberglass cylinder, with its diameter and height dimensions designed by the design unit based on the daily sewage treatment capacity and site space conditions of the project. The cylinder wall is equipped with an inlet and an outlet. The inlet is connected to the sewage source pipeline on the project with a basket grid or a crushing grid. The inlet is equipped with a basket grid or a crushing grid to isolate or directly crush debris in the sewage. The sewage flows into the cylinder through the inlet. When the sewage reaches a certain height inside the cylinder, the liquid level sensor sends a signal to the control cabinet, which starts the submersible sewage pump inside the cylinder. The submersible sewage pump pumps the sewage to the outlet through a stainless steel pressure pipeline. The outlet is connected to the urban sewage pipe network through a pipeline and can directly discharge the sewage into the urban sewage pipe network. The control cabinet is an outdoor rainproof control cabinet that can be equipped with remote monitoring and operation modules, achieving the function of no manual duty. The stainless steel pressure pipeline inside the cylinder is equipped with check valves and gate valves. The check valve prevents sewage from flowing back into the cylinder after the pump stops, while the gate valve closes the pipeline during equipment maintenance to facilitate maintenance. Check valves and gate valves can also be placed in concrete valve wells outside the pump station, depending on the specific situation of the project. There are also guide rails and lifting chains inside the cylinder, which facilitate the later lifting and maintenance of the sewage pump.

　　Example:

　　1. Fiberglass main body;

　　2. Escalator;

　　3. Inlet pipeline (can be equipped with a crushing grille or basket grille);

　　4. Control system (configurable remote monitoring and operating system);

　　5. Install lifting rings;

　　6. Water outlet valve and pipeline;

　　7. Internal maintenance station;

　　8. Submersible pump set;

　　9. Prefabricated cement base plate. Wait (more detailed configurations can be obtained by consulting customer service)

AfterSalesService :

• Prefabricated pump station