Underground fire pump station box pump integrated non floating pump station non floating integrated fire pump station

Description :

Underground fire pump stationFeatures of the integrated non floating pump station product: 1. No welding required - all templates, steel structure frames, and accessories are connected by hot-dip galvanized bolts, thus avoiding the disadvantages of difficult anti-corrosion treatment and easy rusting after welding; 2. Long service life - all load-bearing components are made of hot-dip galvanized and SUS304-2B stainless steel materials, and all are assembled without welding. The sealing material is EPDM (ethylene propylene diene monomer) rubber. The exterior of the pool is coated with epoxy coal tar for corrosion prevention. The interior and exterior of the pool are protected against corrosion with a double-layer coating (asphalt layer+outer hot-dip galvanized layer+inner hot-dip galvanized layer+stainless steel layer). If the galvanized layer is damaged during transportation or installation, epoxy rich zinc+epoxy glass flakes are used for severe corrosion protection, resulting in a long service life; 3. Short installation cycle - large capacity water tanks are installed in 30-50 days; 4. No leakage - EPDM (ethylene propylene diene monomer) rubber sealing material is used for the gaps between templates; 5. Competitive price - comparable to the cost of reinforced concrete water tanks, even saving 30%; 6. High strength - The product structure design is designed by steel structure engineers from the design institute, and the top pressure and lateral pressure are calculated at 100kN/㎡ and without water; The top pressure and lateral pressure are transmitted to the box body and then to the steel structure skeleton inside the box body; 7. Energy saving and environmental protection - this product can be reused and regenerated, meeting the current national environmental protection standards and regulations; 8. Convenient - holes can be opened on site according to the construction unit, and the connecting pipes can be made without welding.

Underground fire pump stationIntegrated non floating pump station with box pumpControl cabinets, dehumidifiers, fire pumps and other supporting equipment are placed in the integrated pump room. The pump room adopts 24-hour passive ventilation, is equipped with drainage facilities, and is coated with thin fireproof coating to meet the fire resistance level of Grade II. We use industrial grade dehumidifiers that operate fully automatically to ensure dryness inside the pump room; The water pump adopts a vertical pump, which is installed in a dry manner for easy maintenance. It adopts a self-priming suction method and meets the requirements of relevant specifications; The control cabinet strictly follows the requirements of the new consumer standard GB50974-2014, and is equipped with dual power supplies. The operating data can be recorded and called. The pipelines and valves are connected by clamps, which are easy to install and can be used by connecting the water outlet. The accessories meet the standards. The integrated non floating pump station with box pump has four major characteristics: integration, standardization, intelligence, and automation. Simply put, integration means saving space, standardization means meeting standards to avoid omissions and save time and costs, intelligence means scientific control, fire hazard warning, automatic fire extinguishing when a fire occurs, and providing data to the fire command center. Production refers to 24-hour emergency repairs, regular inspections, and lifelong maintenance.

AfterSalesService :

• Underground fire pump station