Prefabricated pump station rainwater integration prefabricated pump station sewage lifting prefabricated pump station manufacturer

Description :

Prefabricated pump stationWorkflow: The water in the pipeline flows automatically into the cylinder through the inlet of the pump station. When the water level reaches the pump start level, the liquid level sensor sends a pump start command to the control cabinet. At this time, the control cabinet starts to start the pump. The submersible sewage pump pumps the water through the pressure pipeline to the outlet of the pump station, which is connected to the pipeline network. The pressure pipeline is equipped with gate valves and check valves to prevent the discharged water from flowing back into the cylinder.

　　Integrated prefabricated pump station is one of the main application equipment for urban sewage treatment and flood control. The integrated prefabricated pump station is buried locally, so it occupies a small area and has a small volume, making it easy to transport and install; It can be applied to public buildings such as residential areas, office buildings, hotels, etc. It is widely used and provides convenience for the treatment of our daily sewage and rainwater.

　　The integrated prefabricated pump station is an ideal substitute for traditional sewage pump stations. Usually, traditional pump stations have very strict requirements for planning and construction, requiring every detail to be planned, and the installation of pump stations also requires a lot of manpower, material resources, and time. It is necessary to arrange the construction site and pour concrete, which requires a lot of time to wait for the concrete to harden. Then it is necessary to determine the water inlet point, drill holes, and install the necessary components. It will take at least 2 months to complete these processes. In the construction process of the pump station, it is also necessary to cooperate with contractors of various processes. These unnecessary processes will consume a lot of energy from planners, and the engineering quality of each contractor will also vary. With JZWS, you can complete all the processes including excavation, backfilling, compaction, connection, leak testing, control system installation, trial operation, final debugging, and document recording within one or two weeks. This will save 7 weeks of pump station installation time, with a time-saving rate of 80%. More importantly, it can solve a series of problems such as leakage and corrosion in traditional pump stations, pump failures, sediment deposition, environmental pollution, frequent maintenance, and high costs.

AfterSalesService :

• Prefabricated pump station