Integrated above ground stainless steel fire water tank, box pump, and integrated fire pump station manufacturer

Description :

Integrated ground tank pumpInstallation of fire water tank: 1. The foundation of the water tank requires that the geometric dimensions of the concrete foundation should be formulated in accordance with GB02S101 or relevant regulations of the enterprise. The height difference of the concrete foundation plane is less than 5mm2, and the installation, construction, and acceptance of the water tank require on-site argon arc welding by the welder. There is a standard power supply on the construction site. There is a maintenance space of ≥ 500mm around the water tank. Appearance inspection shows no rust or pollution: Fill the box with water for 2-3 hours, and if there is no obvious deformation or leakage in the welds, it is considered qualified. 3. When using, repairing, and maintaining the piping of the water tank, do not apply excessive load to the inlet and outlet of the piping. Do not directly apply the weight of valves and large-diameter pipes to the water tank inlet. If necessary, install pipe supports: expansion, contraction, and vibration of welded pipes must be equipped with flexible expansion joints.

　　The hot-rolled steel integrated with ground box pumps has much higher free torsional stiffness than cold-rolled steel, so hot-rolled steel has much better torsional resistance than cold-rolled steel. However, for roof box pump integrated fire pressure boosting and stabilizing equipment, stainless steel plates are generally used, while cold-rolled stainless steel plates are mostly used. Two ways to remove surface oxidation of roof box pump integrated fire pressure boosting and stabilizing equipment. When the surface of the roof box pump integrated fire pressure boosting and stabilizing equipment oxidizes, how should we handle it quickly? In fact, many things will basically break down over time after long-term use, and of course, roof box pump integrated fire pressure boosting and stabilizing equipment is no exception. In the process of use, any improper behavior will basically cause serious oxidation on its surface. However, how can we quickly and effectively solve the problem after oxidation occurs? Now let me introduce it to everyone! There are two main methods to quickly solve the problem of oxidation on the surface of the integrated fire pressure boosting and stabilizing equipment for roof box pumps: 1. Sandblasting method, which mainly uses micro glass beads to effectively remove the black oxide scale on the surface of the integrated fire pressure boosting and stabilizing equipment for roof box pumps.

AfterSalesService :

• Integrated ground tank pump