Ground box pump integration Mount Huangshan fire box pump integration

Description :

　　Integrated ground tank pumpBottom plate: Usually, the bottom plate is a folding plate that bends outward and deforms, resulting in uneven bottom plate and overall deformation of the water tank. Our company uses a formed flat bottom plate and places it on a 0.5-spacing channel steel, which is stable and not deformed. It is placed on the top of the channel steel in the opposite direction. Due to the spacing of 1m between the channel steel, the edge of the bottom plate folds in an unstable state due to the pressure of the bottom plate under loading (filled with water). Channel steel: The spacing between the transverse and longitudinal channel steel of the channel steel base is generally 1 meter. The overall stiffness and load-bearing capacity of the channel steel frame are poor. The space between the horizontal and vertical channel steel is 0.5m, and the connection is fully welded to ensure a stable foundation and high strength. Tie rod: Tie rods are generally made of stainless steel or angle steel. If angle steel is used, its impurity content is high, and its solubility is poor when welded with the water tank plate, making it difficult to ensure the strength of the welded joint. If the tie rod is made of the same stainless steel material as the water tank plate, the material composition of the welded joint is uniform, the compatibility is good, and the welding quality is high, it can effectively ensure the welding strength. The integration of Jinze fire box pump can automatically control the water level through a mechanical floating ball valve, which is a simple and common device. Because the installation and maintenance of such float valves are very convenient and suitable for most water tanks. Of course, the customer's requirements are not high, and the water tank is installed on the ground floor where it can be seen. This way, when the water tank is full and the float is lifted, it can be seen. Electric floating ball valve or automatic water level controller: This is a relatively intelligent device that is currently used by buyers as an integrated intelligent equipment for Jinze fire protection box pumps. Because this device is very convenient, as long as the water level point is adjusted, there is no need for manual monitoring of the water level in the tank at any time. Therefore, this automatic water level controller is used in many of our commercial projects. Especially for some rooftop water tanks, the water level cannot be seen at all, using this is really great.

AfterSalesService :

• Integrated ground tank pump