Prefabricated pump station for municipal road rainwater lifting prefabricated pump station

Description :

Prefabricated pump stationIt is mainly used for rainwater and sewage discharge in areas that are relatively remote from urban sewage networks, and can also be used for water circulation pump stations in landscape lakes. It is mainly used for rainwater collection and discharge along municipal roads, sewage discharge in large squares, sewage discharge in large units, as well as for residential areas such as schools and hospitals. The integrated prefabricated pump station can also be used for domestic sewage discharge in residential areas, water supply and drainage in construction sites, urban domestic sewage or rainwater collection and discharge. Prefabricated pump stations are a new type of product that replaces concrete water tanks in the past. Previously, concrete sewage tanks occupied a large area, caused heavy pollution, had a long construction period, and were costly. To build a sewage discharge station, one or several large concrete water tanks were required, as well as equipment rooms, pump rooms, and environmental protection greening. With the emergence of sewage pumping stations, the above drawbacks have been effectively avoided. This demonstrates the advantage of highly integrated sewage pumping stations. The cylinder of the sewage lifting pump station is made by winding resin and fiberglass raw materials, and is a cylindrical cylinder with high strength and extremely strong corrosion resistance. A submersible pump is installed at the bottom of the cylinder in a coupled manner. When the sewage upstream of the sewage lifting pump station flows into the cylinder through the pipeline network, the liquid level probe in the sewage lifting pump station will transmit a pump start signal to the control cabinet. After the pump is started, the outlet of the pump is connected to the main outlet of the pump station through a stainless steel pipeline. After the sewage is discharged, it is discharged through the pipeline network to the destination. The entire set of equipment is directly buried underground, without affecting planting and greening around it. It occupies a small area and cannot be found even if it is not nearby. No need for above ground buildings. Its airtightness will not cause odor to evaporate, and the overall equipment does not require a pump room or equipment room. It automatically starts and stops the pump and does not require manual supervision. Valves, pipelines, water pumps, maintenance platforms, control cabinets, and cables are all installed on one cylinder. This is the high integration of prefabricated pump station sewage lifting pump station.

AfterSalesService :

• Prefabricated pump station