Prefabricated Pump Station Integrated Prefabricated Pump Station Sewage Plant Lift Pump Station Difference

Description :

　　Prefabricated pump stationThere are two types of sewage pumping stations that can be used to lift and transport treated sewage in sewage treatment plants. One is an integrated sewage pumping station that is integrated with the sewage pipe network system, and the other is an integrated pumping station that lifts and transports treated sewage in the sewage treatment plant. And the sewage pumping station is just one type of it. We are mostly used in the use of sewage pipeline systems. The integrated prefabricated pump station and sewage plant lifting pump station are not only used in sewage treatment plants, but also in any place where there is a demand for sewage lifting, our products can be used. The sewage pipe network system is distributed throughout every corner of the city.

　　Description of integrated prefabricated pump station and sewage plant lifting pump station:

　　1. The integrated prefabricated pump station takes into account various factors such as equipment stability, service life, and economic cost. The main body of both sets of equipment is made of high-strength fiberglass;

　　2. Considering that the equipment of the integrated prefabricated pump station is buried, the original design has taken into account factors such as compression resistance and volume. Therefore, the appearance and dimensions will be based on the original design or undergo secondary optimization based on the original design;

　　3. The single pump parameters of the integrated prefabricated pump station sewage pump have been optimized based on the original design, with a selection of Q=15m3/h, H=25m, N=Kw, and two in use and one backup;

　　4. The integrated prefabricated pump station sewage lifting equipment is horizontal, with a diameter of 2 meters and a height of 5 meters. Set up one water inlet with a diameter of DN200; One outlet with a diameter of DN150;

　　5. The integrated prefabricated pump station adopts a vertical design, with a diameter of 3 meters and a height of 4.5 meters. Set up one water inlet with a diameter of DN400; One outlet with a diameter of DN200;

　　6. The equipment configuration, materials, and related parameters of the integrated prefabricated pump station are detailed in Table 1 for the "sewage lifting equipment" used for septic tank sewage and Table 2 for the "integrated sewage lifting pump station" used for rainwater.

　　The use of integrated prefabricated pump stations and sewage plant lift pump stations can also be divided into two situations. One is called an intermediate pumping station because it is located in the sewage pipeline system. A terminal pump station is a pumping station that lifts sewage before all sewage is collected into the sewage treatment plant. The demand for the use of sewage treatment plant pumping stations is usually raised by customers, and we customize products according to their needs. However, as a one-stop integrated prefabricated pump station manufacturer, we should provide reasonable suggestions based on the actual situation of our customers. After all, sewage treatment is their expertise, while intelligent water services are our expertise. The sewage plant lift pump station and the sewage lift pump station are two different concepts, although there is only one word difference. When seeking order solutions, don't confuse them. Most sewage treatment plants only need to do terminal lifting, but if some sewage treatment plants are relatively large, the internal pipelines also need to be lifted to connect to the subsequent treatment work. Therefore, the use of sewage treatment plant lift pump stations and sewage lift pump stations is necessary and numerous. For manufacturers of sewage pumping stations, this is the market and demand.

AfterSalesService :

• Prefabricated pump station