Price List of Steel Core Aluminum Stranded Wire JL/G1A-185/45

Description :

　　 Price List for Steel Core Aluminum Stranded Wire JL/G1A-185/45-30/7

　　Application of steel cored aluminum stranded wire;

　　Steel cored aluminum stranded wire JL/G1A-10/2~1440/100 in accordance with the GB/T1179-2017 standard

　　 Steel cored aluminum stranded wire, also known as aluminum conductor steel reinforced or ACSR, refers to a reinforced conductor consisting of single or multiple layers of aluminum stranded wire twisted around a galvanized steel core wire. Mainly used in the power and transmission line industries.

　　 For high-voltage transmission lines, due to the limited path of the line and the impossibility of installing multiple lines on one path, people have come up with the method of using one path, one set of iron towers, and hanging multiple wires, that is, one line is equivalent to installing multiple lines; For 500KV transmission lines, China mostly adopts the method of hanging four wires, which is called the same tower parallel installation. Advantages of steel cored aluminum stranded wire;

　　 Steel cored aluminum stranded wire has the characteristics of simple structure, easy installation and maintenance, low line cost, large transmission capacity, and is conducive to laying in special geographical conditions such as crossing rivers and valleys. It has good conductivity and sufficient mechanical strength, high tensile strength, and the tower distance can be enlarged. Therefore, it is widely used in overhead transmission and distribution lines of various voltage levels.

　　 Steel cored aluminum stranded wire has a steel "core" inside and is wrapped around the steel core by twisting aluminum wire outside; The steel core primarily serves to add strength, while the aluminum stranded wire primarily serves to transmit electrical energy; For high-voltage transmission lines, due to limited routes and the inability to install multiple lines in one route, we have come up with the idea of using one route, a set of iron towers, and hanging multiple wires, where one line is equivalent to installing multiple lines; For 500KV transmission lines, China mostly uses the method of hanging four wires, which is called "four cut wire". Originally, these four cut wires were ordinary four steel core aluminum stranded wires, without any special features, not one made of steel and three made of aluminum; Corresponding to "bare" wires, there are also overhead insulated wires, mostly JKLYJ, which are overhead aluminum material cross-linked polyvinyl chloride encapsulated wires; It has been widely used in Chinese cities and distribution systems with high requirements for power supply reliability. Although the price is high, it is the development direction of distribution lines. Effect and advantages: Steel cored aluminum stranded wire has the characteristics of simple construction, convenient installation and maintenance, low line cost, large transmission capacity, and is conducive to laying across special geographical conditions such as rivers and mountain gullies. It has outstanding conductivity and mechanical strength, high tensile strength, and expandable tower spacing. Therefore, it is widely used in overhead transmission and distribution lines of various voltage levels.

　　The steel cored aluminum stranded wire (JL/G1A and LGJ) is wrapped around the steel wire by twisting multiple strands of aluminum single wire externally; Steel core mainly serves to increase tensile strength, while aluminum wire mainly serves to transmit electrical energy.

　　Among them, G1A and G1B refer to ordinary strength steel wires; G2A and G2B refer to high-strength steel wires; G3A refers to ultra-high strength steel wire.

　　Steel cored aluminum stranded wire is mainly used in medium and high voltage transmission lines. Due to the limited path of the line and the inability to install multiple lines on one road, people have come up with the idea of using a single path, where multiple steel cored aluminum stranded wires are hung on one tower.

　　Steel cored aluminum stranded wire should be delivered in reels, with the distance between the outermost layer and the edge of the cable reel side panel not less than 30mm, and properly packaged.

　　When packaging steel core aluminum stranded wire, the two stranded wires connected together should have at least half of the aluminum wire cut at the connection point, and the two sides of the connection point should be firmly tied. The cable reel shall comply with the provisions of GB4005-83 "Delivery reels for wires and cables". Short stranded wires are allowed to be delivered in loops, and each loop should be tied at least three times and properly packaged. The product should be inspected and qualified by the manufacturer before leaving the factory, and each product leaving the factory should be accompanied by a quality inspection certificate.

　　Steel cored aluminum stranded wires are arranged in a criss crossing manner on transportation vehicles such as vehicles and ships. The cable reels must be placed steadily, and both sides must be firmly fixed to the transportation vehicle with steel wire ropes. The bottom of the cable reels should be plugged with triangular wedges to prevent them from shaking, colliding, or tipping over during transportation. When transporting large cable reels, attention should be paid to selecting road transportation equipment. If using heavy-duty trucks for transportation, the height of the truck should comply with the height restrictions of bridges, culverts, etc. on the traffic road. If the limit is exceeded, a dedicated trailer can be used to reduce the transportation height. When the cable reel rolls on the ground, it must be rolled in the direction indicated by the arrow on the side of the cable reel. Rolling in the opposite direction will cause the cable to unwind and loosen. For cables without protective plates, the two side plates must protrude more than 10cm from the outer layer of the cable when rolling. During rolling, hard objects should be prevented from pressing under the cable reel to avoid damaging the cable. When rolling the cable reel, it should be controlled within a small distance range, and special equipment such as forklifts or cranes should be used for long-distance movement. Price List for Steel Core Aluminum Stranded Wire JL/G1A-185/45-30/7

AfterSalesService :

• aluminum conductor steel reinforced (ACSR)