Hot water insulation distribution with a load capacity of 12 tons hot water transport vehicle

Description :

　　Special vehicles for delivering hot water to bathhouses and hot springs, with the development of urbanization, the demand for hot water in cities is increasing, such as bathing departments and catering service departments. Due to the potential safety and environmental hazards posed by traditional large-scale boiler water boiling in densely populated areas, the use of large-scale boilers for water boiling has been prohibited in cities. So, the insulation transportation (hot water transport vehicle) developed by our company will meet the requirements of transporting hot water in long-distance low-temperature environments.

　　The difference between hot water insulation transport vehicles and ordinary sprinkler vehicles: The appearance of insulation transport hot water vehicles is the same as that of ordinary sprinkler vehicles, but their configurations are different. Insulated transport hot water trucks add an additional insulation layer outside the water tank (like opening a water bottle with an inner and outer tank), while ordinary sprinkler trucks do not have insulation layers. The water pump used for insulation transportation hot water trucks is a high-temperature resistant hot water pump, while the water pump used for sprinkler trucks is not a high-temperature resistant water pump. Insulated hot water trucks use high-temperature resistant joints and gaskets, while sprinkler trucks use non high-temperature resistant joints and gaskets.

　　Hot water insulation distribution with a load capacity of 12 tons hot water transport vehicleThe hot water insulation transport vehicle is based on the sprinkler truck, with a dedicated insulation layer added to the water tank to achieve insulation and transport of hot water during the cold winter season, just like opening a water bottle with an inner and outer tank. The insulated water transport truck has a self-priming and self discharging function. Thermal insulation transportation hot water trucks can retain sprinkler systems according to user needs. In summer, they can be used for pulling and transporting water, watering and irrigating gardens and greenery, and in winter, they can transport hot water, boiled water, etc.

　　Hot water insulation distribution with a load capacity of 12 tons hot water transport vehicle

　　The insulation layer for transporting hot water and hot spring water trucks is made of rock wool or polyurethane foam with low thermal conductivity, high temperature resistance, light weight, good insulation performance, good insulation and chemical stability. The insulation material is 100MM thick, and the outer surface of the insulation layer is welded with wear-resistant board. The interior of the tank is treated with high temperature and anti-corrosion, and there are anti wave board compartments inside the tank, which have the advantages of insulation, impact resistance, corrosion resistance, and UV resistance.

　　Hot water insulation distribution with a load capacity of 12 tons hot water transport vehicleThe hot water pump of the hot water insulation transport vehicle is selected from high-temperature resistant hot water pump, high-temperature resistant mechanical pump, and three box asynchronous motor pump. The mechanical pump has self suction and self discharge function. Users can choose according to their needs. A mechanical pump is driven by an engine to transfer power from a power take-off to a hot water pump, which pumps or delivers water to the water consuming unit. The three box asynchronous motor pump is driven by an external power source to deliver hot water from the tank to water using locations such as bathhouses and bathhouses.

　　Recommended hot selling car models:

　　Dongfeng Dorica 3308 wheelbase vehicle, effective volume of 4-5 cubic meters after tank insulation

　　Dongfeng Dorica 3800 wheelbase and effective volume of 8 cubic meters after tank insulation.

　　Dongfeng D9/Tianjin 3950 wheelbase, effective volume of 10-12 cubic meters after tank insulation.

　　Dongfeng D9/Tianjin 4500 wheelbase, effective volume of 12-13 cubic meters after tank insulation.

　　Dongfeng rear eight wheel 4350+1300 wheelbase, with an effective volume of 15-20 cubic meters after insulation of the tank body.

　　Factory direct sales with a load capacity of 2 tons, 3 tons, 5 tons, 6 tons, 8 tons, 10 tons, 12 tons, 15 tons, 20 tons, insulation transportation for hot spring water and hot water trucks

　　Bathhouse and bathtub insulation transportation hot water - hot spring water special vehicle, manufacturer of transportation hot water vehicles

　　Thermal power plants and boiler factories provide hot water trucks for insulation distribution to bathhouses, with factory prices for hot water insulation trucks

　　Hot water insulation transport vehicle - insulation sprinkler truck - garden greening sprinkler truck - water truck - drought relief vehicle - dust suppression sprinkler truck

　　Our company is manufacturer direct sales, which directly saves the intermediary fees of distributors and agents. Interested customers are welcome to visit Suizhou, Hubei. Or call for consultation. Let you buy a cost-effective, affordable, high-quality, and satisfactory insulated car.

AfterSalesService :

• Hot water insulation transport vehicle