Small hook arm garbage truck

Description :

　　A vehicle can operate in conjunction with multiple garbage bins for circular transportation. One vehicle can be equipped with multiple garbage bins to achieve joint operation with garbage bins at multiple locations, fully improving the transportation capacity of the vehicle. Can carry multiple boxes in one car, energy-saving and cost saving. The garbage bin and vehicle can be completely separated, with the advantages of reasonable structure, easy operation, stability, high efficiency, good sealing performance, and convenient dumping. Hook arm garbage truck

　　also known asdetachable container garbage collector Hook arm garbage truckPull arm garbage truckArm hook garbage truck.

　　Car detachable garbage truck【Hook arm garbage truck】The box part of the garbage truck is completely controlled by the hydraulic system. On weekdays, the vehicle can place the garbage bin at various garbage collection points. After the garbage collection is full, the vehicle can directly drive to the garbage collection point. Through the operation of the hydraulic system, the hook arm installed on the back seat of the garbage truck can be lowered to hang the connection point at the front end of the garbage bin in the station, and the garbage bin can be pulled to the back seat of the vehicle. At this time, the vehicle can be started to transport the garbage to the garbage treatment station for self dumping. The advantage is that one vehicle can be equipped with multiple buckets, and one vehicle can maintain the operation of several garbage collection stations, with high efficiency. The box is designed to be sealed and will not cause secondary pollution.

　　Hook arm garbage truck - small garbage truck

　　The hook arm garbage bin is used in combination with a detachable garbage truck, and users can choose the size and capacity according to their needs. The shape of the garbage bin is mainly trapezoidal with a lower rectangle, an upper arc with a lower rectangle, an upper arc with a lower rectangle, an upper arc with a lower arc, and a rectangle. There are one or two pairs of garbage input ports or top openings on each side of the box. The covered box can prevent light garbage (plastic bags, waste paper, etc.) from being blown away by wind and prevent rainwater from entering the box; The bottom of the box is equipped with a pair of iron wheels for easy movement of the garbage bin during lifting and unloading. The rear of the box can be opened with a locking mechanism and a sealing strip.

　　Hook arm garbage truck - small garbage truck

　　The detachable garbage bin in the carriage is used in conjunction with the detachable garbage truck in the carriage. Different sizes and models of garbage trucks are selected based on the user's usage needs, traffic conditions on the road section, and the capacity of the supporting garbage bin. Chang'an's 2 and 3 detachable garbage trucks, Futian's 2 and 3 detachable garbage trucks, Liberation's 2 and 3 detachable garbage trucks, Dongfeng's 2 and 3 detachable garbage trucks, Kaima's 2 and 3 detachable garbage trucks, Futian's 4 and 5 detachable garbage trucks, Kaima's 4 and 5 detachable garbage trucks, Dongfeng's 4 and 5 detachable garbage trucks, Dongfeng's 6 and 8 detachable garbage trucks, Dongfeng's 10 and 12 detachable garbage trucks, and Dongfeng's 15 and 16 detachable garbage trucks.

　　Steps for placing a detachable garbage truck box in the carriage

　　 1. After starting the train, attach the power take-off and push down the locking hook operating handle to the retracted position. The locking cylinder retracts, causing the locking frame to flip down. The flipping frame is then released from the garbage bin and locked to the attached frame. Release the handle to return it to the center position;

　　 2. Pull up the arm operating handle to the extended position, extend the arm cylinder, and rotate the movable arm around the front hinge axis of the flipping frame. The garbage bin will flip and tilt down together with the movable arm; When placing garbage bins, it is strictly prohibited to stand at the rear of the carriage.

　　3. After placing the pull arm garbage truck, adjust the position of the movable pull arm hook and the box hook to make it uncouple, push the pull arm operating handle down to the falling position, retract the pull arm oil cylinder, rotate the movable pull arm around the front hinge shaft of the flip frame, put the movable pull arm back on the attached frame, release the power takeoff garbage container and place it, and the whole vehicle can be transported and driven.

　　Steps for pulling up the garbage bin of the detachable garbage truck in the carriage

　　 1. Push the locking hook operating handle to the retracted position, retract the locking cylinder, retract the locking frame, and lock and fix the flipping frame with the attached frame;

　　 2. Pull up the operating handle of the pull arm to the extended position, extend the pull arm oil cylinder, and rotate the movable pull arm around the front hinge axis of the flipping frame. The pull arm is in the hook box position, adjust the height of the pull arm hook appropriately and align it with the curved hook of the box body;

　　3. When the arm hook reaches the curved hook of the garbage bin, continue to push the arm operating handle to the down position to continue loading the garbage bin;

　　4. After the garbage truck body is placed on the attached frame, release the pull arm operation handle to return it to the center position, then pull up the locking hook operation handle to the locking position, extend the locking oil cylinder, flip up the locking frame, and lock and fix the flipping frame with the garbage truck body. Release the handle to return it to the center position; Complete the loading work of the garbage truck box, release the power take-off, and the whole vehicle can be transported and driven.

AfterSalesService :

• Hook arm garbage truck