Yueyang Epoxy Floor Paint Epoxy Super Wear resistant Floor Paint Dustproof, Mold proof, Wear resistant, Good Hardness
Category:
fine chemicals /Coatings, Paints/Floor paint
Model:
Epoxy resin ultra wear-resistant floor paint
Brand:
supe
brand:
supe
model:
Epoxy resin ultra wear-resistant floor paint
type:
Epoxy class
Liquid type:
Solvent based
Properties of film-forming material:
organic
Classified by solvent type:
Oil paint
Retail Price
38.00USD
重量
kg
- Product Description
-
brand supe
model Epoxy resin ultra wear-resistant floor paint
type Epoxy class
Liquid type Solvent based
Properties of film-forming material organic
Classified by solvent type Oil paint
Description :
technical indicators Test Project indicator Drying time, H Table stem (H) Practical (H) ≤4 ≤24 bond strength ≥2 Shore hardness ≥80 Impact resistance, Kg·cm 50 passed Wear resistance (750g/500r, weight loss, g) ≤0.02 water resistance 48 hours without any changes Compressive strength, Mpa ≥70 Flexural strength, Mpa ≥6 Tensile hardness, Mpa ≥7 Resistant to 30% saltwater No bubbles, no peeling, slight discoloration allowed Resistant to 10% No bubbles, no peeling, slight discoloration allowed Resistant to 10% No bubbles, no peeling, slight discoloration allowed Gasoline resistant, 120# No bubbles, no peeling, slight discoloration allowed 
Performance Characteristics
◇ Impact resistance, heavy pressure resistance, and excellent mechanical performance;
◇ Dustproof, mildew proof, wear-resistant, and good hardness;
After hardening, the shrinkage rate is small and there are no cracks;
◇ Resistant to general chemical corrosion such as water, oil, acid and alkali;
◇ Smooth and bright appearance, diverse colors;
Seamless, easy to clean, and easy to maintain.
construction technology
Process Name Specific methods and requirements Recommended dosage Bottom coat 1. Mix solvent based epoxy single component primer or solvent-free epoxy primer (main paint: curing agent=5:1) and stir evenly; 2. Use a roller and brush to evenly apply without any omissions.
0.15-0.20Kg/m2 Medium coated mortar 1. Mix solvent based epoxy intermediate paint (1:1) or solvent-free epoxy intermediate paint (5:1) in proportion and add an appropriate amount of 40-100 mesh quartz sand to stir evenly; 2. Use a scraper to scrape the entire area 1-2 times;
3. After curing, polish the defects such as knife marks and clean them thoroughly.
0.7kg/m2/mm Putty layer 1. Mix solvent based epoxy intermediate paint (1:1) or solvent-free epoxy intermediate paint (5:1) in proportion and add an appropriate amount of filler (such as quartz powder, talc powder) to stir evenly; 2. Use a knife to mark 1-2 times, with a focus on filling in any potholes or defects on the ground;
3. After curing, polish the defects such as knife marks and clean them thoroughly with a vacuum cleaner, chicken hair conditioner, wrung out wet towel, etc.
0.2-0.30 kg/m2 topcoat 1. Mix solvent based epoxy topcoat (1:1) or solvent-free epoxy topcoat (5:1) in proportion and stir evenly; 2. Dip the prepared roller into the topcoat and apply it evenly by rolling. The coating should be uniform without any omissions, and roll it twice.
0.25-0.30 kg/m2 wear-resistant layer 1. This process can be selected and used according to user needs; 2. After 12-24 hours of solvent based epoxy floor paint application, which has cured to leave no footprints on pedestrians, apply a layer of epoxy wear-resistant topcoat by rolling, which can greatly improve the smoothness and durability of the floor
0.12 kg/m2 
Hunan Jiangcai Xin Coating Co., Ltd. is dedicated to serving you 24 hours a day. Looking forward to your call!
AfterSalesService :
Key words:- Yueyang epoxy floor paint
More Products
