Xiupo epoxy resin mortar floor has excellent impact resistance, heavy pressure resistance, and mechanical properties
Xiupo epoxy resin mortar floor has excellent impact resistance, heavy pressure resistance, and mechanical properties

Xiupo epoxy resin mortar floor has excellent impact resistance, heavy pressure resistance, and mechanical properties

Category:

fine chemicals /Coatings, Paints/Floor paint

Model:

Epoxy resin mortar floor paint

Brand:

supe

brand:

supe

model:

Epoxy resin mortar floor paint

type:

Epoxy class

Liquid type:

Solvent based

Properties of film-forming material:

organic

Classified by solvent type:

Oil paint

Retail Price

38.00USD


重量

kg

  • Product Description
  • brand

    supe

    model

    Epoxy resin mortar floor paint

    type

    Epoxy class

    Liquid type

    Solvent based

    Properties of film-forming material

    organic

    Classified by solvent type

    Oil paint

    Description :

      Warehouses, underground parking lots, and factories of mechanical manufacturing enterprises require that the ground should not be covered with sand and dust, and should be able to withstand the rolling of various vehicles (such as cars, forklifts, carts, etc.). Therefore, the flooring of these places not only needs to have the general floor protection system's flat and smooth decorative effect, but also needs to have strong wear resistance and compression resistance.

      The epoxy resin flooring system is a high wear and pressure resistant floor made by combining epoxy compression resistant and wear-resistant mortar with epoxy topcoat. It is a flooring system that solves the ground protection problems of heavy machinery manufacturing enterprises, industrial and commercial warehouses, underground parking lots, and other areas.

      Scope of Application

      The ground of special places such as supermarkets, hallways, warehouses, car showrooms, car repair shops, and car parking lots;

      Areas with high mechanical performance requirements, such as the floors of mechanical, electronic, electrical, instrumentation, pharmaceutical, textile, clothing, food, tobacco and other enterprise factories with certain impact

      Performance Characteristics

      ◇ Impact resistance, heavy pressure resistance, and excellent mechanical performance;

      ◇ Dustproof, mildew proof, wear-resistant, and good hardness;

      After hardening, the shrinkage rate is small and there are no cracks;

      ◇ Resistant to general chemical corrosion such as water, oil, acid and alkali;

      ◇ Smooth and bright appearance, diverse colors;

      Seamless, easy to clean, and easy to maintain.

      construction technology

    Process Name Specific methods and requirements Recommended dosage
    Bottom coat 1. Mix solvent based epoxy single component primer or solvent-free epoxy primer (main paint: curing agent=5:1) and stir evenly;

      2. Use a roller and brush to evenly apply without any omissions.

      

    0.15-0.20Kg/m2
    Medium coated mortar 1. Mix solvent based epoxy intermediate paint (1:1) or solvent-free epoxy intermediate paint (5:1) in proportion and add an appropriate amount of 40-100 mesh quartz sand to stir evenly;

      2. Use a scraper to scrape the entire area 1-2 times;

      3. After curing, polish the defects such as knife marks and clean them thoroughly.

      

    0.7kg/m2/mm
    Putty layer 1. Mix solvent based epoxy intermediate paint (1:1) or solvent-free epoxy intermediate paint (5:1) in proportion and add an appropriate amount of filler (such as quartz powder, talc powder) to stir evenly;

      2. Use a knife to mark 1-2 times, with a focus on filling in any potholes or defects on the ground;

      3. After curing, polish the defects such as knife marks and clean them thoroughly with a vacuum cleaner, chicken hair conditioner, wrung out wet towel, etc.

      

    0.2-0.30 kg/m2
    topcoat 1. Mix solvent based epoxy topcoat (1:1) or solvent-free epoxy topcoat (5:1) in proportion and stir evenly;

      2. Dip the prepared roller into the topcoat and apply it evenly by rolling. The coating should be uniform without any omissions, and roll it twice.

      

    0.25-0.30 kg/m2
    wear-resistant layer 1. This process can be selected and used according to user needs;

      2. After 12-24 hours of solvent based epoxy floor paint application, which has cured to leave no footprints on pedestrians, apply a layer of epoxy wear-resistant topcoat by rolling, which can greatly improve the smoothness and durability of the floor

      

      Construction section

      Hunan Jiangcai Xin Coating Co., Ltd. is dedicated to serving you 24 hours a day. Looking forward to your call!

    AfterSalesService :

    Key words:
    • Xiupo epoxy resin mortar floor