Lufeng hydraulic baler paper hydraulic baler

Description :

　　Lufeng hydraulic baler paper hydraulic baler

　　 Vertical hydraulic baler developed and produced by Lufeng MachinerySemi automatic waste paper baler, pressurized waste paper baler, hydraulic waste paper baler, waste paper baler, small waste paper baler, metal waste paper balersemi-automaticWaste paper baler, etcMachines are classified according to their pressure tonnage10T 20T 30T 40T 60T 80T 100T 120T 160T 200T 240T 300T 360T model,this kind ofhydraulic balerReducing waste storage space, saving up to 80% of stacking space, and lowering transportation costs, hydraulic balers are an ideal choice for manufacturers and wholesale retailers to deal with stockpiled waste. They use hydraulic principles to compress materials into blocks, which is beneficial for environmental protection and waste recycling. Reflecting the overall plan and development trend of green development in this industryThe model and size of the hydraulic strapping machine can be customized according to customer requirements. New and old users are welcome to come to the factory for inspection and on-site testing.

　　Technical parameters of hydraulic strapping machine:

　　Characteristics of hydraulic strapping machine:

　　1. The small hydraulic baler has a stylish appearance and fine workmanship, with four bundling grooves, three breadboards, single-sided feeding, and convenient operation

　　2. The hydraulic baler is equipped with anti rebound hooks, safety switches, and safety interlock mechanisms

　　3. The hydraulic strapping machine adopts advanced electrical control components, which are easy to operate, durable, and can be used without debugging. It can be manually bundled Automatic flipping of packages Automatically push packages

　　4. The hydraulic baler has a rigid pressure plate structure, which facilitates the recycling of various waste materials, fast compaction, low noise, and high efficiency During non pressure stroke operation, the pressure plate automatically returns to its unloaded position to avoid a decrease in power due to high oil pressure.

　　User needs to know

　　The hydraulic baler uses 46 # hydraulic oil, connected to a three-phase 380V power supply with a rated current of 25A. Grounding protection is required during installation, and the motor must run in the indicated direction before it can be started, otherwise it cannot be started. Hydraulic oil must be added to the oil tank before it can be started for use. But when the temperature drops, the concentration of hydraulic oil is high, and the filter inside the machine cannot play a filtering role. At this time, the filter must be removed and can only be reinstalled and used after the temperature recovers. (Note: The filter should be cleaned 1-2 times a month). Overflow Raft - Control the pressure switch of the machine. Rotate the pressure regulator to turn right for boosting and left for reducing. The pressure has been adjusted before leaving the factory. However, during use, the pressure regulating hand wheel may be displaced, leading to pressure increase or decrease. At this time, it is necessary to generate a new regulating pressure. The pressure regulating should be carried out during operation, and the pressure plate should be lowered to the low position. Adjust the pressure regulating hand wheel of the overflow raft. The regulating pressure should not be higher or lower than the range shown in the pressure gauge. The pressure should be OMPA (100KG/1cm2). Side pole - enhances the rigidity of compression and serves as a guide. It should be lubricated with oil before each use. Travel switch - controls the start and stop of the machine, so it needs to be checked, repaired, and maintained regularly. Manual steering valve - a switch that controls the pressure plate to move up and down and stop.

　　Manufacturer's Warm Reminder：

　　1. Regarding the price: The prices marked online are all reference prices, and the information published on each website varies. We cannot introduce the price of each model one by one. We hope that customers can contact our customer service for detailed prices and mechanical parameters of each model when placing an order.

　　2. Regarding payment: The down payment can be used for logistics express delivery, and the remaining payment will be made after the goods arrive!

　　3. Regarding shipping costs: Our prices do not include shipping costs, as shipping costs vary across different regions of the country. The shipping fee needs to be calculated based on the size of the equipment purchased by the customer and the distance of the road. Please contact our customer for specific feesClothing.

　　four By eliminating intermediaries, producers can directly meet with users, simplifying the circulation process and shortening the time for circulation, achieving truly favorable prices for manufacturers. You only need to pay a 40% deposit in advance for logistics express delivery, and the remaining balance will be paid upon arrival of the goods.

AfterSalesService :

• hydraulic baler